14
TELESCOPING ALUMINUM
ATV LOADING RAMP
Model 1084TR
625 pound capacity - single.
•
1,250 pound capacity - double.
•
Compact Storage.
•
Assembly required.
•
One person loading.
•
WARNINGS
The loading ramp surfaces are sharp. Always wear proper clothing and use care when
•
handling the loading ramps. (Gloves are strongly recommended).
Read and understand all safety and operating instructions before using the loading ramp.
•
Never allow anyone unfamiliar with these instructions to use the loading ramps.
Read and understand all safety and operating instructions provided by the manufacturer
•
of the equipment the loading ramp will be used with.
•
Extreme caution should always be used while loading and unloading your equipment.
•
Do not exceed the rated capacity of the loading ramp.
•
Do not exceed the rated capacity of the loading surface (i.e. tailgate). If unknown, contact
•
the manufacturer to find the maximum load capacity.
Never stand in the path of equipment being loaded, and keep all bystanders and children
•
away from loading ramps.
This ramp must be only used for loading and unloading to and from a level and stable
•
surface.
Use caution when using ramp in icy or wet conditions. The ramp surface may become
•
slippery.
Do not use this loading ramp to load live animals.
•
Do not use loading ramps as a bridge, scaffolding, or any other use for which it is not
•
intended or designed.
If ramp is bowing while loading or unloading your equipment, which indicates an overload
•
condition, remove the equipment immediately.
Do not attempt to load or unload any power equipment with its motor running.
•
Failure to follow these warnings may result in property damage and/or serious bodily injury.
•
Repair Parts
When ordering repair parts always give the following information,
PRODUCT NAME, MODEL NUMBER, PART NUMBER, and PART DESCRIPTION.
For missing parts or questions
Call 1-800-652-2321
Ohio Steel Industries
Columbus, OH 43224 U.S.A.
Visit our website: www.ohiosteel.com
LIMITED ONE-YEAR WARRANTY
If this product fails due to a defect in material or workmanship within one year from the date
of purchase, Ohio Steel will at its option repair or replace it free of charge. Proof of
purchase required for all warranty claims.
This warranty does not cover:
Repairs necessary because of operator abuse or negligence.
•
Equipment used for commercial or rental purposes.
•
Contact Ohio Steel to arrange for product repair, or return this product to place of purchase for
replacement.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. This Warranty applies only while this product is in use in the United States.
6
7
15
7
8
2
13
1
9
10
5
12
4
3
REV-B
17
Manufactured under U.S. Patent No. 5,645,394
REF. NO.
PART NO.
AMT. DESCRIPTION
REF. NO.
PART NO.
AMT. DESCRIPTION
1
84TR-01
1
RAMP TOP
10
STDWF375USS 4
3/8" FLAT WASHER
2
84TR-02
1
RAMP BOTTOM
12
STDNK370
4
3/8"-16 KEPS NUT
3
LR-03
2
SUPPORT BAR
13
84TR-13
1
SNAP BUTTON (A-190S)
4
LR-04
2
CLEVIS PIN
14
LR-14
1
BUNGEE W/S-HOOK
5
LR-05
2
SUPPORT BAR PADS
15
84TR-15
1
NYLON HANDLE
6
STDBH2500375 2
1/4"-20 X 3/8" BOLT
16
84TR-16
1
MANUAL - NOT SHOWN
7
STDWF250USS
4
1/4" FLAT WASHER
17
84TR-17
1
HARDWARE BAG - NOT SHOWN
8
84TR-08
2
1/4"-20 T-NUT
18
84TR-18
1
WARNING DECAL - ON RAMP
9
STDBH3750750 4
3/8"-16 X3/4" BOLT
