Office Star Products Space Seating 867-B2P1N4, Operating Instructions

Page: 1 / 2

ÉTAPE 1 ÉTAPE 2
ÉTAPE 4 ÉTAPE 5
ÉTAPE 3
© Office Star Products février 2020
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués
sur la liste et vérifier les quantités des pièces.
ÉTAPE 1
Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu’à ce que les roulettes (2) s’encliquettent.
ÉTAPE 2 Attachez la plaque du siège (4) au coussin de siège (5) avec la flèche vers l’avant de la chaise, en utilisant quatre vis du plaque du
siège
(9).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 3 Fixer le support du dossier (11) à l’arrière du plaque du siège (4) à l’aide trois vis du dossier (10).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 4 Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ÉTAPE 5
Fixez les coussinets de bras (7L & 7R) au dossier (6) avec la flèche vers l’avant de la chaise, en utilisant duex vis su bras (8) pour chaque bras.
SERREZ TOUTES LES VIS AVEC LA TOURNE-A-VIS DE PHILLIPS (13).
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3.
Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
4. Plaque du siège . . . . . . . . . . . . . . . . . . . . . .1
5.
Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
6. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
7.
Coussinets de bras (7L et 7R) . . . . . . . . . . .2
8. Vis du bras . . . . . . . . . . . . . . . . . . . . . . . . . .4
9.
Vis du plaque du siège . . . . . . . . . . . . . . . .4
10. Vis du support du dossier . . . . . . . . . . . . .3
11.
Support du dossier (pre-installed) . . . . . . .1
12. Clé Allen . . . . . . . . . . . . . . . . . . . . . . . . . .1
13.
Tourne-a-vis de phillips . . . . . . . . . . . . . . .1
2
1
4
3
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift
lever (1). To lower seat height sit on chair and lift lever (1).
NOTE:
It is normal for chair to slightly lower under body weight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment knob that will allow the user to change the tension
of the tilting feature. Turn knob (3) clockwise to increase tension
and counter-clockwise to decrease or ease the tension. To lock,
return chair to the upright position and push lever (1) in. To
unlock, pull lever (1) out.
NOTE:
Be careful not to loosen back tilt adjustment knob completely.
• SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, lift lever (2) up. Release
lever (2) to lock desired seat position.
• FLIP ARM
To flip arms up, simply pull up on arm. To lower arm, simply pull
down on arm.
NOTE: To flip arm all the way back, arm pad needs to be at the most
outward position.
• 3D PU PADS:
Press button (4) to move arm pad backwards,
inwards, outwards or forward. Release button (4) once the
desired postion is reached.
867-B2P1N4 / 867-B3P1N4 / 867-B7P1N4
MESH BACK MANAGER’S CHAIR
OPERATING INSTRUCTIONS
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 275 lbs. or less. The
63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829’s with self-adjusting mechanism are
300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for
incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year
warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department
will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net , by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
2
7R
1
3
X3
X5
4
5
9
12
8
6
13
7L
10
12
5
11
X4
X4
1
4
867-B2P1N4 / 867-B3P1N4 / 867-B7P1N4
CHAISE A DIRECTION AVEC
LE DOSSIER EN MAILLES
INSTRUCTIONS DE MONTAGE