![background image](http://html1.mh-extra.com/html/oemtools/23976/23976_operating-instructions-and-parts-manual_3394769001.webp)
UNPACKING
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit. Check
for loose, missing, or damaged parts. If any damage is
observed, a shipping damage claim must be filed with
the carrier. DO NOT use the OEMTOOLS™ 3 Speed
Evaporative Cooler if broken, bent, cracked or damaged
parts (including labels) are noted. Any Evaporative
Cooler that appears damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Evaporative
Cooler was subjected to shock load (a load that was
dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Evaporative Cooler under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your Evaporative Cooler. Failure to follow instructions listed below may result in serious injury. In addition, make sure
that anyone who uses the equipment understands and follows these safety instructions as well.
Operating Instructions and Parts Manual
23976/23977
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar
with this product before you begin using it. This product is designed for certain applications only. OEMTOOLS™
cannot be responsible for issues arising from modification. We strongly recommend that this product is not modified
and/or used for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the product until you have first contacted customer service to determine if it can or
should be performed on the product.
WARNING
:
This product can expose you to chemicals, including DEHP and lead, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explanation of Safety Signal Words
WARNING
:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES
:
Provide clarity and helpful information.
3 SPEED EVAPORATIVE COOLER
1
12/18
2018 OEMTOOLS
™
WARNING
3,100 CFM 3 Speed
Evaporative Cooler
23976
5,300 CFM 3 Speed
Evaporative Cooler
23977