Installation
manual
towel warmer
Model OD-0704
SPECIFICATIONS
Voltage: AC 120V
Frequency: 60 Hz
Rated power : 40 W (OD-0704-SS) 50 W (OD-0704-MB)
Unit size: 400 X 530 mm
This towel warmer is intended for the use in bathrooms or laundry areas.
Read the instructions carefully before operating.
Please read the wall-mounted installation carefully to understand how to install on your ideal location of the wall.
Please use the services of a certified electrician for the apparent wireless installation of this product.
Make sure to complete the installation before using it.
Plug the power cord into an electrical outlet for the apparent wire installation.
Switch ON/OFF : Press button ON/OFF, product will start to work, if you want to stop it, press the button again.
The timer can be adjusted to 2 h (hour) or 4 h (hour). Press the button to select the right time.
Please turn it off and take the plug out from the outlet if you are not using it.
Hardwire installation
1
3+1
8
3+1
8
4
1
1
2
1
Client
TOLERANCES
FINI DE SURFACE :
125
PROJECTION :
± 1/16"
± .01"
± .003"
± .0005"
1/X
.XX
.XXX
.XXXX
± 1°
ANGLE
SAUF CONTRE INDICATION, LES
DIMENSIONS SONT EN POUCES.
C:\dessin classé compagnie\Odass\round tube.asm
Asn Machinerie inc
82 St-Joseph Sud
Rivière-Bleue qc
Canada G0L-2B0
www.asnmachinerie.com
tel:418-893-5844 fax:418-893-2858
cell:418-714-1829
round tube ASM.dft
CLIENT
DATE DESSINÉE
DESSINÉ PAR
NOM
ÉCHELLE
PAGE
REV
CE DOCUMENT EST LA
PROPRIÉTÉ DE
Asn
Machinerie inc IL NE DOIT
PAS ÊTRE DÉVOILÉ, UTILISÉ
OU REPRODUIT EN TOUT OU
EN PARTIES SANS
L'AUTORISATION ÉCRITE DE .
Asn Machinerie inc
21-02-2020
1 de 1
N/A
emplacement
70.00 mm
115.00 mm
84.00 mm
bolt
wire hole
92.00 mm
#6-32 screw
0.75" long
