background image

WELCOME

Thank you for choosing AKVoice®. Let’s get started connecting your phone service 
with the features you need.

STEP 1 - CONNECT THE OBi IP DESK PHONE TO THE INTERNET

Connect your OBi Desk Phone to the Internet through a wired or wireless connection. 

Note: If using the OBiHai 1022, you will need the ObiWiFi USB dongle to connect 
wirelessly (sold separately).

CONNECT VIA WIRED CONNECTION
1.  Remove the telephone from the box and plug in the power cable.
2.  Use the included network cable to connect to an available port on your internet 

router or if you have a wifi network, follow the instructions in “connecting via 
wireless connection” below.

3.  Plug the Ethernet cable into the back of the phone in the port labeled SW.
4.  Wait 5 minutes for device to boot and register with the server the first time.

CONNECT VIA WIRELESS CONNECTION - OBiWiFi SETUP 
For OBi1022 only, connect the OBiWiFi USB dongle to the USB port (on the rear of the 
telephone). The OBi1062 does not need the OBiWiFi USB dongle.
1.  Navigate to the Settings icon on the telephone menu using the 

< >

 arrow keys and 

press the 

 key.

2.  Use the arrow keys to select WiFi.
3.  Scroll down to SSID and press Scan.
4.  Select your wifi network and press Connect.
5.  Scroll down to Password and select Edit.
6.  Use the dial pad to enter the password (use the Mode soft key to change between 

letter and number entry); when complete press Save then Connect.

7.  The phone will attempt to connect to your WiFi and will reboot. If your phone does 

not reboot, repeat the steps above to re-enter the password.

OBi IP Desk Phone 

QUICK START

Page 1 - Version 1.0

Updated  10/17/18

Step 1
Step 1 - Connect the 
OBi IP Desk Phone to 
the Internet

Step 2
Set Your Emergency 
Response e911 
Location

Step 3
Set Up Voicemail

Reviews: