NEOCLEAN-F series User’s Manual
1. Introduction
Thank you for choosing the "NEOCLEAN-F" optical connector cleaner. This
product is a pen-type optical fiber connector cleaner that cleans the ferrule end face
of the optical connector. Please read this instruction manual carefully to ensure
proper use.
2. Safety Instructions
Caution
・
This product should only be used for cleaning optical
connectors. Otherwise, it may not function properly.
・
Because of its slender shape, accidental eye contact may
cause blindness or other serious eye injury. Please handle this
product carefully.
・
Be careful not to get injured by hitting your hand against the
surrounding equipment during operation when using this
product in a small area.
・
Do not touch the cleaning thread. Otherwise, cleaning
performance may be impaired.
・
Pay special attention so that excessive force is not applied to
the tip where the cleaning thread passes. Otherwise, it may be
deformed or damaged.
Prohibited
・
Do not use this product forcibly in a confined space so that it
is difficult to operate. Otherwise, this product or cleaning target
may be damaged.
・
Do not use for lens type optical receptacles such as
transceivers and optical measurement equipment. Otherwise,
the optical lens may be damaged.
・
Do not disassemble, repair by yourselves or modify the main
unit. It can affect performance.
・
Do not attach anything other than this product to the
attachment string/strap. Otherwise, the string may break,
resulting in damage or injury.
※"NEOCLEAN" is a registered trademark of NTT Advanced Technology Corporation.
Pen-type optical fiber connector cleaner
