![background image](http://html.mh-extra.com/html/novus/8813800000/8813800000_instruction-manual_1712720001.webp)
NOVUS AUTOMATION
1/11
TagTemp-S
TEMPERATURE DATA LOGGER - INSTRUCTION MANUAL V1.0x
1
INTRODUCTION
TagTemp-S is an electronic temperature recorder. The temperature
measured by the sensor is recorded in equipment internal memory.
This data is transferred through a smartphone equipped with an
embedded NFC interface or by an NFC interface connected to a
computer through an USB port (both not included).
LogChart-NFC application for ANDROID™ and the Nx Software for
Windows® are the tools used to configure the operating mode,
transfer and display data. The acquisition start and end parameters,
logging interval, setpoint alarms and other parameters can be easily
defined using these applications.
The operating manual and Nx Software can be downloaded from
the manufacturer's website. The ANDROID™ LogChart-NFC app
can be downloaded from Google Play Store.
2
MECHANICAL INSTALLATION
TagTemp-S can be installed using a double-sided adhesive tape on
the back of the device, taking care not to stick it over the
identification tag. Another way is to use the blister hole to attach the
transmitter.
3
TECHNICAL FEATURES
Operating
temperature
-30 °C to 60 °C
Storage
temperature
From -30 °C to 65 °C.
Measuring range
Temperature: -30.0 °C to +60.0 °C.
Accuracy of
measurement
±1 °C max. over the full measuring range.
Note: You can correct the measurement
error in the OFFSET parameter using the
configuration software.
Measurement
resolution
Temperature: 0.1 °C / 0.1 °F
Memory Capacity
4020 registers.
Interval between
Measurements
1 minute min.
4 hours max. (240 minutes).
Power Supply
3.0 V lithium battery (CR2032), built-in,
non-replaceable.
Battery life
(estimated)
Above 2 years at a 5-minute acquisition
interval.
Dimensions
37 x 57 x 8 mm
RF Interface
ISO 15693 (NFC-V) compatible.
Data transfer time
between register
and smartphone
Approx. 20 seconds (depends on the
smartphone processing speed).
LogChart-NFC
Application
ANDROID™ version: 4.0 or above.
Languages: Portuguese or English.
NFC interface for
the computer
USB to NFC interface (optional),
compatible with Nx Software for
Windows®.
Case
Polyvinyl Chloride (PVC)
Degree of protection All electronics are protected by the
housing. IP65 compatible.
Certification
CE