background image

NOVAK ELECTRONICS • PROFILE SOFTWARE

1

Introduction .....................................................................................2
What’s Included ............................................................................... 2
Adjustable Parameters .....................................................................3
Hardware Installation .................................................................... 11
Operating System Requirements .................................................. 12
Running From 3.5” Floppy Drive ...................................................12
Installing/Running Software .........................................................13
Windows 3.1® & Windows 95® .................................................... 13
MS® DOS ....................................................................................... 13
Precautions .................................................................................... 14
Acquiring Default Parameters ....................................................... 14
Uploading Parameters From Cyclone ........................................... 15
Editing Parameters ........................................................................ 16
Downloading Parameters To Cyclone ........................................... 18
Saving Parameters To Disk ............................................................ 19
Reading Parameters From Disk ..................................................... 19
Monitoring Transmitter Trigger .................................................... 20
Sample Profile Data ....................................................................... 20
Service Procedures ........................................................................ 21
Service Return Sheet ..................................................................... 22
Trouble-Shooting Guide ................................................................ 23
Software License & Product Warranty .......................................... 23
Profiles ........................................................................................... 24
Profiles ........................................................................................... 25
Index .............................................................................................. 26
Notes .............................................................................................. 28

Complete Instruction Manual for
the Novak ESC Profile Software
Program.

CONTENTS

Summary of Contents for ESC PROFILE SOFTWARE





























Reviews: