User Guide: NCS15
B (BM)
banknote and coin counter
NCS15B-BM_User_guide-030415
7.0 CALIBRATION MENU
Allow 5 minutes warm-up time (power on) before attempting calibration.
In SETUP MENU, change standby time
to 10 minutes to stop the counter from switching off. When finished, reduce standby time to save battery power.
Calibration should be performed while the counter is running on battery power.
Place the counter on a flat, stable surface. Do not lean or make contact with the surface during calibration. Make
sure the room is free from excessive air drafts
Press
|}
MENU
key and select
OPTIONS
Select
CALIBRATION MENU
from the
OPTIONS MENU
7.1 CALIBRATING SCALES
To maintain accuracy the counter can be calibrated using a precise 100g weight
Select
CALIBRATE SCALES
from calibration menu
Start calibration and follow screen prompts (
ESC key can be used to abort calibration at any time)
On completion, select one of two options:
If any banknotes or coins were previously calibrated, select
USER CALIBRATED
, other-
wise select
FACTORY DEFAULT
7.2 CALIBRATING SCOOP
To use a different scoop to the one supplied, it needs to be calibrated first.
Select
CALIBRATE SCOOP
from calibration menu
Start calibration and follow screen prompts
7.3 CALIBRATING PACKAGING ITEMS
Calibration requires between 10 and 100 samples of packaging items such as elastic bands, paper clips,
etc. Use only elastic bands with consistent width and diameter.
Select
CALIBRATE PACKAGE
and the type of package to be calibrated
Select a sample quantity to be used for calibration
Select used quantity (1-12, number of packaging items used to make a package)
Start calibration and follow screen prompts
7.4 CALIBRATING BANKNOTES AND COINS
Please refer to a separate document:
http://www.noteandcoin.com/Downloads.html
8.0 PRINT FUNCTIONS
Press PRINT key to display the print options menu
Print Single
Print running total for active denomination
Print Total
Print the grand total
Print Menu
Press
ENTER key to view saved counts data or PRINT key to print it
Use
or
key to change between coins and banknotes screen
Press PRINT key to individually print a full breakdown of coins or banknotes
Auto Print
Press
ENTER key to toggle automatic print option
(Every time a count is registered, it will be printed automatically with current time & date)
9.0 POWER MANAGEMENT
The money counter can be operated from the internal battery or mains charger. The counter is not supplied with
a charger and can be charged from a standard 5V-USB charger used for smartphones, tablets and similar devic-
es via the USB cable supplied with the counter.
To prevent damage to personnel and equipment, use only reputable brand chargers like Apple, Samsung, etc.
To save battery power, banknote and coin counter will enter standby after a period of inactivity determined by
the STANDBY setting. Select shortest practical standby time from the OPTIONS MENU.
LCD backlight uses significant amount of battery power. The backlight will be reduced after a period of inactivity
determined by the BACKLIGHT setting. Select shortest practical backlight time from the OPTIONS MENU.
www.noteandcoin.com
Select required
DENOMONATION
Select required
COUNTING MODE
Press to
SWITCH ON
Press and hold to
SWITCH OFF
MAIN MENU
RESET MENU
