![background image](http://html.mh-extra.com/html/northstar/mppwe/mppwe_installation-operation-and-maintenance-manual_1708949001.webp)
P r o v e n P e r f o r m a n c e
K - B A R I n d u s t r i e s , F a r i b a u l t , M N , 5 5 0 2 1
MPPWE
Installation, Operation, and Maintenance Manual
PRESSURE WASHER
:
Cleans dirty surfaces with high pressure water.
To the Owner:
Thank you for purchasing a Northstar pressure washer. Your machine is designed for long life, dependability,
and the top performance you demand! Take time now to read through this manual so you better understand the
machine’s operation, maintenance and safety precautions. Everyone who operates this machine must read and
understand this manual. The time you take now will prolong your machine’s life and prepare you for its safe
operation. Enjoy the exceptional performance of your Northstar pressure washer, the industry leader!
The manufacturer reserves the right to make improvements in design and/or changes in specifications at any
time without incurring any obligation to install them on units previously sold.
Quick Facts
Engine Oil
Engine is shipped without oil. Fill before starting.
Use SAE 10W-30 motor oil.
Pump Oil
Pump is shipped with oil. Change oil plug and check pump oil level before starting.
Use SAE 30 Non-detergent pump oil (item# 4043) or Cat Pump oil (item# 22158) for oil
changes.
Water
Make sure your water flow is 20% higher than the pressure washer’s flow rate.
Make sure your water is clean and particle free.
Storage
Do not allow water to freeze in the pump, hose, or spray gun.
Add fuel stabilizer to the fuel tank before long term storage.
Spraying
Chemicals
Use any North Star brand or equivalent pressure washer chemicals.
Couple the chemical injector to the pump outlet. Use black nozzle.
Maintenance
Schedule
Engine:
Oil: change after first 20 hours, then annually or every 100 hours.
Spark Plug: clean every 100 hrs., replace annually or every 300 hrs.
Air Filter: clean every 100 hours, replace annually or every 300 hrs.
Cat Pump:
Oil: change after first 50 hours, then every 3 months or 500 hours.
General Pump: Oil: change after first 40 hours, then every 3 months or 500 hours.
Read and understand all manuals before operating.
Any Questions, Comments, Problems or Parts Orders
In the United States
In the United Kingdom
Northstar Customer Service
Call 02392639752
Call 1-800-270-0810
Northern Tool and Equipment Co. (UK) Ltd.
Hours: Monday - Friday 7:00 AM to 5:30 PM
Unit 2, Keel Close,
Saturday 7:30 AM-11:30 AM Central Time
Portsmouth, Hants PO3 5QD, England
ITEM NUMBER:
SERIAL NUMBER:
Engine Model:
Pump Model:
Flow:
Pressure:
Hose Length:
Lance
Length:
Nozzle Size: