background image

 
 
 

 
 
 
 
 

Gasoline Portable Air Compressor        

Installation, Operation and Maintenance Manual

 

 

To the Owner: 

Thank you for purchasing a NorthStar Air Compressor.  Your machine is designed for long life, dependability, 
and the top performance you demand!  Please take time now to read through this manual so you better 
understand the machine’s operation, maintenance and safety precautions.  Everyone who operates this machine 
must read and understand this manual.  The time you take now will prolong your machine’s life and prepare you 
for its safe operation.  Enjoy the exceptional performance of your NorthStar Air Compressor, the industry leader! 
The manufacturer reserves the right to make improvements in design and/or changes in specifications at any 
time without incurring any obligation to install them on units previously sold. 

 

Quick Facts 

Engine Oil 

Engine is shipped without oil.  Fill before starting.  
Use SAE 10W-30 motor oil. 

Pump Oil 
 

Check pump oil level before starting. 
Use non-detergent pump oil (part # 4043). 

Air Filter 

Replacement air filter part number is AB2281000  

Maximum 
Pressure 

Maximum pressure = 130 psi. 
 

Maintenance 
Schedule 

Engine: 

Oil: change after first 20 hours, then annually or every 100 hours. 
Spark Plug: clean every 100 hrs, replace annually or every 300 hrs. 
Air Filter: clean weekly, replace annually or every 1000 hrs. 
Refer to your Honda engine owner’s manual for further instructions. 

 

Tank: 

Drain water daily 

 

Compressor 
Pump: 

Oil: change after first 50 hours, then every 3 months or 500 hours. 

Read and understand all manuals before operating.

 

 
 

 
 
 
 

Any Questions, Comments, Problems, or Parts Orders 

Call NorthStar Product Support 1-800-270-0810

M45939B

   

 

45939; Honda GX160,  

20-Gallon Tank 

 

®

Содержание M45939B













Отзывы: