background image

8807517        12/12

1250 XLT GENERATOR

Model: 51769

m

CALIFORNIA PROPOSITION 65
WARNING: You can create dust 
when you cut, sand, drill or 
grind materials such as wood, 
paint, metal, concrete, cement, 
or other masonry. This dust 
often contains chemicals 
known to cause cancer, birth 
defects, or other reproductive 
harm. Wear protective gear.
WARNING: This product or its 
power cord may contain 
chemicals, including lead, 
known to the State of California 
to cause cancer and birth 
defects or other reproductive 
harm. Wash hands after 
handling.

CAUTION:

FOR YOUR OWN SAFETY 
READ INSTRUCTION MANUAL 
COMPLETELY AND 
CAREFULLY BEFORE 
OPERATING THIS GASOLINE 
ENGINE Failure to follow all 
instructions as listed below 
may result in electrical shock, 
fire, and/or serious personal 
injury.

SPECIFICATIONS:

Engine: 

2-stroke; Single Cylinder 

Horizontal Shaf.

Start Type:

Recoil Start

Rated Power: 

800W

Fuel Capacity: 

1.2 gallons

Run Time:

5.5 hours

SAFETY WARNINGS

1) Do not operate this generator 
indoors or in enclosed spaces. 
Emissions created by this 
generator are harmful.

2) Do not operate the generator in 
wet conditions. This will increase 
the risk of electrical shock.

3) Do not directly connect the 
generator to a household power 
supply.

4) Do not smoke while refueling 
the generator. Do not overflow the 
fuel when refueling the generator. 
Stop the generator before 
refueling.  Gasoline is

flammable and the sparks may 
cause it to ignite. Keep the 
generator at least 3 feet away 
from flammable materials. 

5) Electrical equipment, 
including any lines and plug 
connections, should be 
insulated. 

6) The circuit breakers should 
be matched with the generator 
equipment. If the circuit 
breakers need replacement, 
they must be replaced with a 
breaker that has identical 
ratings and performance 
characteristics.

7) Do not operate the generator 
before grounding it. An 
ungrounded generator could 
cause electrical shock to occur.

8) The temperature of the 
environment will affect the 
overcurrent protector. Please 
change the protector so it will fit 
with the local environment 
temperature.

For customer service, call 1-800-348-5004 or email

1

For warranty purchase, please keep your dated proof of purchase. File or attach to the manual for safekeeping.

Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this
product. Observe all safety information to protect yourself and others. Failure to observe the instructions may
result in property damage and/or personal injury. Please keep instructions for future reference.

[email protected]

Important Operating Instructions

Summary of Contents for 1250 XLT














Reviews: