T
roub
le
s
h
oo
ti
ng
Multi-Function Silver Glittered Tree
Instruction Manual
For indoor use only
Retain carton for storage purposes
model no. 1 5 1 -7109-2 Toll-free number: 1.866.827.4985
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
ASSEMBLY:
1) This product comes packed in four pieces: the bottom section of the tree, the middle
section of the tree, the treetop and the stand.
2) Place the base on a sturdy surface and unwind the
STAND
, insert the tree bottom
section into the hole of the
STAND
. Tighten the screw to keep the
STAND
stable.
And then insert the tree middle and tree top sections as per Fig A. The branches of
middle and bottom section are hinged and will fold down easily.
3) Shape the tree by arranging the branches into the desired position. Finished look
should be natural-looking and full.
4) Three light chains are pre-decorated on the 3 sections of the tree.
5) Connect the chains by fitting the male and female connectors with same letter of
indicator (total: 2 pair of connectors, you can easily find them between the tree
sections) and screw the plastic cap on (see Fig A, B). Ensure that the connectors are
securely tightened.
6) Connect the plug of the light sets to the power supply. Check that all bulbs are lit.
The control box allows access to 8 light functions.
7) Your tree is ready to be decorated and enjoyed.
SHAPING:
The tree is shipped from the factory with the tips of each branch
compressed to the centre. Each branch tip must be shaped to its proper position to give
the tree a natural look. This is done by gently grasping the branch tips and spreading them
out away from the centre of the tree, working from the bottom up.
STORAGE:
Branch tips should be carefully pressed back towards centre when tree is disassembled for
storage. Store in original carton in a cool, dry location protected from sunlight.
Press the control box to get the different effect:
1. Combination
2. In waves
3. Sequential
4. Slo-Glo
5. Chasing/Flash
6. Slow fade
7. Twinkle/Flash
8. Steady on
If the lights do not work:
1) Ensure the power outlet is working correctly.
2) Ensure the male and female connectors on the tree are properly connected.
3) Check that the jack plug on the light chain is connected to the transformer.
S
p
e
ci
al
ty
Tr
o
u
bl
e
s
h
oot
in
g
Fig A
Fig B
