background image

Note:  If the above solutions do not correct the problem please contact Nine Stars Customer

Service.

Lid does not open

- Make sure the power is on by pressing the power button. 

- Check if the batteries are placed in correctly.

- Wipe the sensor with a dry cloth.
- Press the”Open/Close” button to close the trash can.

- Check to see if there are any objects within the sensor

  area. If there are, remove them.

- Wipe sensor with dry cloth to insure the sensor is clean

  and that there is no excess moisture on it.

- Battery power is low. Replace the batteries.

Lid does not close 

Lid opens slowly / 

LED turned Red

Errors

Solutions

Place rear side

down first

Please complete the section below and mail or email it with a PHOTO COPY of the original sales receipt within 30 days of purchase to the address below.

Ninestarsusa 
@NineStarsUSA
#NINESTARSUSA

Tel: 866.978.2778

Fax: 909.620.8853

Add.:  1929 Mount Vernon Ave.

 

Pomona, CA 91768

Email: [email protected]

CONTACT US AT:

FOLLOW US AT:

WARRANTY REGISTRATION

DZT-8-29 / DZT-10-29

Warranty #

(Please Print Clearly)
Full Name:

______________________________________________________________

Address:

______________________________________________________________
______________________________________________________________

City:

__________________________________________________________

State: 

____________________

  Zip Code: 

___________________________

Phone #: 

______________________________________________________

Email: 

________________________________________________________

Date of Purchase: 

______________________________________________

Purchased from: 

_______________________________________________

UPC # (Located under bar code of the packaging):

_______________________________________________________________________

Please mail the completed warranty registration card with proof of purchase to:

CUSTOMER SERVICE

Attn: Warranty Registration

1929 Mount Vernon Ave., Pomona, CA 91768

OR email the completed warranty registration card with proof of purchase to:

 [email protected]

OPTIONAL:
Would you like to hear more about our products:
Yes 

_______

     No 

_______

We value any comment, if any please provide it here.  

_______________________________________________________________________

Please keep a record of this warranty number.

User’s Manual

D-SHAPE MOTION SENSOR TRASH CAN

Model: DZT-8-29 / DZT-10-29

Introduction

Overview

Instruction

Nine Stars infrared motion sensor trash cans are designed and created to make dealing with 

trash cleaner and easier. Our products provide an effortless way to dispose of trash by 

providing a touch-free environment. Simply put an object or hand above the strategically 

placed infrared motion sensor (located near the lip of the lid) and the lid will automatically 

open. Once the object or the hand is no longer within the sensor’s range the lid will 

automatically close within seconds. We at Nine Stars use the highest quality materials and the 

latest technology in our products to insure reliable function and durability. Thank you for your 

business and we sincerely hope that you enjoy your unit.

Additional Features

Technical Facts

Hands-Free

Automatic Lid

Liner Ring 

- Supports

Trash Bag (Inside)

LED Indicator Light

Infrared Motion

Detecting Sensor

Power Saving On/Off

& Open/Close Button

Battery Compartment

(Fits 2 “AA” Batteries

Not Included)

Plastic Base Capacity:

DZT-8-29 (2.1 Gal / 8L)

DZT-10-29 (2.6 Gal / 10L)

Patented Product

Model: DZT-8-29 / DZT-10-29
Note:  Trash can may not be the same size as the above image. However, all functions are the

 

same. These models are to be used in-doors at all times.

Liner Ring

Trash Bag

Trash Container

Step 1 - Remove all components

from the box

• Lid 

• Liner Ring

• Trash Container

Step 2 - Insert batteries

Locate the battery compartment on the back of the 

trash can lid. Squeeze the tab on the battery cap in 

and carefully lift up to open. Insert two (2) "AA" 

batteries. Insert the batteries in accordance with 

the positive (+) and negative (-) poles. To close, 

insert side without clip first and push the battery 

cap down. Make sure it clicks to ensure that it’s 

securely fastened.

Keeping Lid Open Longer

Press the “OPEN/CLOSE” button to open the lid and 

keep the lid in the open position for longer time period. 

Press the button again to close the lid and reset it back 

to sensor mode.

LED light indicators:

 

A.

  When powering On the unit, press the “OPEN/CLOSE” button, a green light will appear.

B.

  A solid green light will appear when the lid opens and it will remain lid when the object

  is within the sensor range.

C.

  A flashing green light will appear when the lid is about to close.

D.

  A red indicator light will appear when the battery is low. Please replace the batteries.

E.

  When powering Off the unit press and hold the button, a flashing green light will appear

  and turn to a sold red light. 

1.  Align batteries according to the positive and negative poles.

2.  Do not submerge the trash can into water because it is equipped with many electrical

  components. The trash can may be wiped with a damp cloth. 

3.  Do not manually force the lid close; this can cause damage to the internal gears. If the

  gears are damaged, the automatic lid will not function properly.

4.  Replace used batteries in a timely manner to prevent battery acid leakage. Battery acid

  may cause damage to the electrical components of the trash can. 

5.  Do not mix new and used batteries.

6.  Do not place trash can in direct sunlight or a heavily moisturized environment.

7.  Do not mix alkaline, standard (zinc-carbon), or rechargeable (NiCd, NiMH, etc) batteries.

Step 3 - Insert trash bag

Insert the trash bag using the liner ring (see 

diagram). Fold the trash bag over the edges of the 

liner ring. Place the trash bag and the liner ring in 

the trash container. Tuck the bag completely into 

the base of the container so that edges of the bag 

do not show once the  lid is placed on top of the 

base. **DO NOT put liner ring inside the bag**

Step 4 - Trash can set up

Align the lid with the base of the trash can and 

gently place the lid on top.

Step 5 - Turning the trash can On/Off

The “Power/Open/Close” button is located on the 

front of the automatic lid. Press the button to turn 

the power/sensor ON. Press and hold the button to 

turn the power/sensor OFF.

Step 6 - Using the trash can

Place your hand or an object within inches of the 

motion sensor (located on the lid). The lid will open 

instantly. Once your hand or object is out of range 

of the sensor the lid will close within seconds. The 

lid will remain open if the object stays within the 

sensor range.

Parameters:

Voltage: DC 3V

Current use (standby): ≤ 30μA

Current use (working): ≤ 200mA

Lid opening time: ≤ 1second

Lid closing time: ≤ 5 seconds

Sensor zone: Approx. 9.8 in / 25cm

Warning

Troubleshooting

Limited Warranty

What does this Warranty cover?

-  This warranty covers the electronic mechanism of the lid such as the computer chip,  

  motor, gear box and electrical circuits only.

How long does the coverage last?

-  This warranty is valid two years from the date of purchase.

What will Nine Stars do?

-  Nine Stars will fix or replace any defective or malfunctioning lid.

-  Customer is responsible for returning the defective or malfunctioning lid (entire top unit of  

  the Trash Can) to Nine Stars. The customer is also responsible for shipping charges to  

  return the product to us. Nine Stars will pay for shipping charges back to the customer if  

  the lid is covered under our warranty program outlined in this document.

What does the warranty not cover?

-  The base of the unit, battery caps, liner rings (if applicable), inner bucket (if applicable), or  

  any problems with the automatic lid caused by abuse, misuse, or natural disasters (such  

  as earthquakes, floods and fires) are not covered.

-  User’s modifications or alterations to Nine Stars products will void User’s Warranty.

-  Only our authorized distributors will be covered under our warranty. We will NOT warranty  

  products purchased from auctions, auctioneers, discount/closeout stores.

How do you get service?

-  In order to be eligible for service under this warranty you must return the warranty    

  registration card attached with a proof purchase (such as a copy of original sales receipt)

  within 30 days of purchase. Please retain a copy for yourself.

How does state law apply?

-  This warranty gives you specific legal rights and you may also have other rights that vary

  from state to state.

Reviews:

Related manuals for DZT-8-29