Viper Fang 15B How To
Machine Operation
1
Please read the
Owner’s Manual before
operating this machine.
2
Sweep or dust mop the
surface to be cleaned.
Make sure the recovery
tank is locked.
3
Check battery status.
Make sure ball float is
clean.
4
Fill solution tank with
water
(do not exceed
130
°
F).
5
Inspect squeegee blade
and install squeegee.
6
Inspect squeegee blade
and install squeegee.
7
Mount brush or pad driver
on the drive wheel hub
(rotate counterclockwise
until it locks).
8
Lower squeegee to the
floor.
9
Turn on switches.
10
Adjust water flow by
manually turning the
ball valve
11
Press handle button to
engage brush. Repeat
this step if necessary.
12
Adjust handle
(squeeze
lever below handlebar)
to
desired position. Begin
cleaning.
