background image

Nilfisk A/S

Banemarksvej 58, 

DK-2605 Broendby

DENMARK

Tel.: +45 43 23 40 50

Fax: +45 43 43 77 00

[email protected]

www.nilfisk.com

ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual.

2.  Fill the solution tank with a clean 

water. The clean water temperature 

must not exceed 40 °C.

3.  The tank cap can be used for 

dosing the detergent. One full cap 

is 30ml giving 1% detergent of the 

3L tank capacity. (*)

4.  Connect the power plug to the 

electrical socket.

1.  Release the handle to remove the 

tank assembly.

19.  Clean the squeegee bars and the 

cylindrical brush with water.

17.   Remove the squeegee bars.

18.   Unscrew by turning the knob 

clockwise to remove the 

cylindrical brush.

20.  Clean the machine using a damp 

cloth and where needed use a 

neutral cleaning product. Then 

store the machine in a clean and 

dry place.

14. 

 

Disconnect the power plug from 

the electrical socket and rewind 

the cable from the machine and 

place it in the cable holder.

13.  Park the machine in upright 

position. 

       If needed turn off the machine by 

pressing the main button. 

       Press the main switch to “0”.

9.  Move the machine with the handle 

and start cleaning the floor.

11.  The red LED blinks when the 

machine is getting low on solution 

and fixed light when empty. Empty 

the recovery and refill the solution 

tank to continue working.

12.  To use the manual suction hose press 

the main button to start the machine in 

upright position. Turn the hose connec-

tion to ON and use the suction tube. 

When done press the main button and 

turn hose connection to OFF. (**)

15.  Empty the recovery and solution 

tank. Clean them with water.

16.  Check and clean the solution and 

vacuum filter regularly.

10.   For double scrubbing, use the 

pedal to lift/lower squeegees.

5.  Turn on the machine with the main 

switch to “I”.

6.  Use the orange pedal to put the 

machine in working position.

7.  When machine is in working 

position press the main button 

and start cleaning. Machine will 

automatically stop when parked 

upright.

8.  Press one of the solution buttons, 

according to the type of cleaning to 

be performed:

    1 drop - normal cleaning

    2 drop - heavy duty cleaning

 At the end of the work

(*)  ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.

(**)  THE MANUAL SUCTION HOSE IS INCLUDED ACCESSORY ONLY FOR THE FULL PACKAGE VERSION; FOR THE BASIC VERSION IS AN OPTION.

Click

OPERATING GUIDELINES 
SC100

ScrubVac
01309 676796
[email protected]
www.scrubvac.co.uk

Reviews: