Page 1
© 2017
P/N MX3114 D0584 Rev E
Installation Instructions
MX3114
StrongArmPark DC Articulating Arm
Review the illustrations for the steps involved in assembling the
articulating arm and attaching it to the StrongArmPark DC chassis.
Tools required
• Box end wrenches: 7/16 and 9/16 inch
• Drill
• Socket head wrenches: 7/16 and 9/16 inch
• Drill bit 9/32 inch
• 1/4 - inch Hex key
For detailed views of the assembly, see page 2.
Breakaway bracket and
Mounting bracket assembly
described in
StrongArmPark DC
Quick Start Steps
, MX3651-01.
If the tip of the arm droops or angles up too much, level
the arm by tightening or loosen the linkage fasteners
that secure the rod ends.
Rod end
Rod end
Arm cap
Tip of the arm
1/4 inch
fasteners
Drill 9/32 inch
mounting holes
Connect arm
light cables.
Tuck wiring
inside arm.
Arm light cables inside arm’s
articulating bracket
