background image

Model NT-6648 (Patent Pending)

10” Triple Light Mode

Under Car 

LED Work Light

The rechargeable NextLED Under Car Work Light is 

highly versatile and is designed to illuminate nearly 

every project you have under your car. This work light 

features three distinct modes of operating. The first 

is a high power, super bright, 500 lumens wide angle 

light which illuminates the entire disc. The second is a 

highly flexible 18” detail light with a zoom function that 

can be used to eliminate shadows by pinpointing light 

on the exact spot you are working on. The third is a 

UVA light which which emits from the center disc and 

can be used to provide leak detection. The disc light 

measures 10” and comes standard with 4 steel wheels 

that allow you to quickly and easily move the light 

around underneath the car. 

CAUTION: 

Read all instructions and warnings before operating!

SAVE THESE INSTRUCTIONS! 

WARNING:

 To avoid serious injury or death from electrical shock or fire:

1.  This fixture 

MUST ALWAYS BE USED IN ACCORDANCE WITH ALL 

  ELECTRICAL AND SAFETY CODES AND ORDINANCES

, including 

  the most recent National Electric Code (NEC) and with the 

  Occupational Safety and Health Act (OSHA) Volume 1 on General 

  Industry Standards and interpretations.
2.  

ALWAYS

 make certain that the power source conforms to the rating 

  on the fixture.

DO NOT 

inspect or service the fixture while charging.

4. CAUTION: 

This fixture is for indoor use

Keep dry. Do not open, 

  drop, short-circuit, incinerate, expose to temperatures higher 

  than 140ºF, or charge/use if damaged.

5. People with pacemakers should consult their physician(s) before 

  use. Electromagnetic fileds in close proximity to heart pacemaker 

  could cause pacemaker interferance or pacemaker failure

6.  This fixture is not explosive-proof, 

DO NOT

 use in potentially 

  dangerous locations, such as in flammable or explosive 

 atmospheres.
7. 

NEVER

 operate the light with the clear protective glass 

  broken or removed.
8. 

NEVER LOOK DIRECTLY INTO LIGHT SOURCE

. LED’s are extremely 

  bright and can damage eyes with prolonged exposure.
9. 

KEEP AWAY

 from heating vents, radiators, or other sources of heat.

10. 

KEEP OUT OF REACH OF CHILDREN

.

LITHIUM BATTERY SAFETY WARNINGS

LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY AND 

WILL VENT FIRE OR EXPLODE IF MISTREATED:

1. Keep work light dry.

2. DO NOT DO ANY OF THE FOLLOWING TO BATTERY PACK:

  a. Drop

  b. Open

  c. Short-circuit

  d. Puncture

  e. Incinerate

  f.  Expose to temperatures greater than 140ºF.

3. Charge work light only according to these instructions

PRODUCT INSTRUCTION

1. Push down on the toggle power switch to 

  turn on the LED light. The switch shows LED.

2. Push down on the toggle power switch to 

  turn on the UVA light. The switch shows UV.

3. Push the toggle power switch to the middle 

  position to turn off the light.

4.  To operate the flexi-light, take the flexi-light 

  and position it so that it is shining directly on 

  the area that you need illuminated. Push the button on the head  

  of the flexi-light once to turn on and a second time to turn off.

CORDED OPERATION

While the charger is plugged in, the under-car light will continue to 

operate normally, while the battery is charging. 

FLEXI-LIGHT USAGE

To operate the flexi-light, take the flexi-light and position it so that 

it is shining directly on the area that you need illuminated. The 

flexi-light has a zoom feature in the head of the LED. If you pull up 

on the head of the light, it will zoom the light.  If you pull back on the 

head, it will spread the light back out.  To store the flexi-light, simply 

wrap the cord around the base of the under-car light, and snap the 

head in place.

MAINTENANCE

Only qualified service personel must perform repairs. Opening or 

visible attempts to open or repair work light will void any warranty 

and/or cause damage to the product or personal injury.
 CAUTION! Do not use solvents such as gasoline, turpentine, 

  etc. to clean the unit. Aerosols and other chemical will fog the 

  clear polycarbonate lens.

Reviews: