The EXT-100 Extender Kits are robust, long reach single port UTP solutions designed for indoor
applications. For outdoor applications, the remote would need to be placed into a NEMA rated
enclosure suitable for the installation environment. Contact 1-800-BERKTEK for patch cords designed
for harsh environments. The kit includes a EXT-100-Main, a EXT-100-Remote, and a 60 watt 55 V power
supply. The EXT-100-Remote, when connected to the EXT-100-Main unit via four-pair UTP cable, can
deliver 100 Mbps (symmetrical full duplex) with up to 30 watts of power at a 2,000 ft (610 m) reach. The
EXT-100 offering is designed specifically to enable easy deployment over UTP for reaches beyond that
of standard Ethernet, eliminating the costs and disruption associated with IDF closet requirements.
QUICK INSTALL GUIDE - EXT-100 EXTENDER KIT
PRODUCT OVERVIEW
EXT-100 Extender Kit (EXT-100-Main + EXT-100- 60 W, 55 V Power Supply)
P/N: EXT-100 81001153
Installation Steps (for EXT-100 Extender Kit)
EXT-100-Main
*
EXT-100-Remote
Standard PoE Switch
Local Power
Up to 60 W, 55 V
(Optional)
Four-Pair UTP Cable
up to 2,000 ft (610 m)
3519117151713212319272925333531394137454743
462101281618142224202830263436
SFP+1
SFP+2
SFP 1
SFP 2
32404238464844
EXT
-100-Remote
Main
Device
Redefine the limits
DEVICE
Local Power
Up to 60 W, 55 V
(Optional)
The max length supported
between the EXT-100-Main and
the PoE Switch is 328 ft (100 m)
Activity
37-55V
DC IN
Link/Speed
Green:
100Mbps
Orange:
10Mbps
TO REMOTE
37-55V
10 GR
ACT
LNK
SPD
100 GR
Link
Activity
TO SWITCH
ACT
LNK
Link
Activity
Activity
37-55V
DC IN
Link/Speed
Green:
100Mbps
Orange:
10Mbps
TO MAIN
37-55V
DC IN
ACT
LNK/SPD
TO DEVICE
ACT
LNK
To Device
To Switch
To Main
(EXT-100-Main)
To Remote
(EXT-100-Remote)
Product Details (EXT-100-Main)
• Paired with EXT-100-Remote
• Up to 30 W PoE
• Local power option
• IEEE compliant
Product Details (EXT-100-Remote)
• Paired with EXT-100-Main
• Up to 30 W PoE
• Local power option
• IEEE compliant
1. Remove the EXT-100-Main and EXT-100-Remote from packaging.
2. Must ensure cable is properly terminated before connecting any EXT-100 product.
3. Remove all legacy equipment from the UTP cable infrastructure.
NOTE:
In order to avoid damage to devices, it is important that only IP devices are connected when you connect the EXT-100-Main.
4. Connect EXT-100-Main (Switch side) to downlink port on switch.
5. Connect the Network Infrastructure cable from the EXT-100-Main (Remote side) to EXT-100-Remote (Main side).
6. Using Cat 5e or higher category cable, connect the device to the EXT-100-Remote (Device side).
NOTE:
Berk-Tek recommends using LANmark IP (22AWG) or higher for indoor applications; LANmark-6 OSP, LANmark-1000 OSP, or LANmark-10G
OSP should be used for outdoor applications.
The EXT-100-Remote must be installed either indoors or in a NEMA rated box appropriate for the installation environment.
Installations must be compliant with the requirements of the local authority having jurisdiction.
Copyright 2019 Berk-Tek LLC | 445-0027-A | Page 1
1-800-BERK-TEK (1-800-237-5835) | +1-717-354-6200 | www.berktek.us
The max length supported
between the EXT-100-Remote and
the Device is 328 ft (100 m)
