H
ow
t
o
re
pl
ac
e
th
e
N
ew
to
n
™
M
es
sa
ge
Pa
d
20
00
/2
10
0
Ba
ck
lig
ht
backlight4you | Hauptstr. 25 | D-79725 Laufenburg |
Qualification
To replace the Newton™ Backlight-Foil, you need to be skills in modifying
electronics and mechanics.
We want to inform that replacing the foil without being skilled will damage
your device in an irreparable manner.
Non-Warranty
If you replace the foil by yourself ,backlight4you is not liable to any damage of
the foil or your device. We guarantee for the quality and lifecycle of the foil.
This manual neither entitles nor implies any right for claims for compensation.
It is merely a recommendation.
Needed Tools and Materials
• Cross-Screwdriver Philips Size 1
• Cross-Screwdriver Philips Size 0
• Screwdriver max. 1mm
• Knife
• Insulating Tape
• Pliers for electronics
• Elektronics edge cutter
• Soldering Iron
• Solder (S-Sn60Pb38Cu2 recommended)
• SMD-de-solder knifes (or SMD de-solder tool)
• Soldering iron for SMD (or low-power soldering iron with very small tip)
L
as
t M
od
if
ic
at
io
n:
0
4.
01
.2
5
