Power2U
®
The NewerTech Power2U AC/USB wall outlet
offers a clean, convenient, and centralized
location to charge or power mobile devices in
addition to powering traditional AC-powered
devices.
The Power2U is an easy DIY install on any
15A electrical circuit and provides a flush,
standard wall outlet appearance that blends
in seamlessly with residential environments.
By incorporating both traditional three-prong
AC wall sockets and USB ports, the Power2U
AC/USB wall outlet enhances living and
working spaces by eliminating the clutter
created by multiple cables and unsightly
bulky power adapters.
CAUTION: READ BEFORE INSTALLING!
•
An installation video is available at:
www.newertech.com/p2u-install/
•
Failure to follow these instructions
can cause death or permanent injury.
Do not work on live electrical circuits!
•
This product is for indoor, permanently
installed use only.
•
Install the device in accordance with all
national and local electrical codes.
•
Do not place the device to be charged in
direct sunlight or near direct heat, as this
will affect the charging function.
•
Disconnect the USB cable from the USB
socket when not in use.
•
It is normal for the battery in the device
being charged and the USB charger
itself to generate some heat during the
charging process.
General Information
This product is a 2-in-1 electrical wall socket. It
can be used as a standard 15A 120V electrical
receptacle, as well as for charging products
that utilize a USB connection up to 2.5 amps.
It is ideal for charging electronics such as
iPhone, iPad, iPod, MP3 players, PDAs, GPS
receivers, gaming consoles, and other devices
that charge via USB.
The NewerTech Power2U uses the most
advanced IC control system in the world,
and provides multiple levels of protection to
your device. The Power2U is manufactured
from high quality polycarbonate resin and all
internal components are UL-approved.
The Power2U has three (3) pre-stripped wire
leads for line, neutral, and ground for quick
and easy installation. The Power2U also
includes three (3) wire nuts to fasten the
leads.
Identify Cables and Wires
Do NOT install the NewerTech Power2U into
an electrical box that is smaller than 14 cubic
inches. If your electrical box contains more
than 4 wires (not including ground wires),
verify that its capacity is large enough to ac-
commodate this device before proceeding.
Do not overfill the electrical box!
Wiring and Wire Connections
The Newer Technology Power2U is designed
to work with either solid wire or stranded
wire, 12 or 14 AWG. When attaching the wire
to the Power2U, please refer to the drawings
on
Page 2
to ensure proper connection.
FOR SUPPORT PLEASE VISIT:
www.newertech.com/support/
Technical Specifications
USB Input: AC 125V 50/60Hz 350mA
Operating Temperature: -10ºC to 35ºC
Relative Humidity: <=75%
USB Output: DC 5.2V 2.5A
AC Input: 15A, 125V (NEMA 5-15R)
