background image

General Information

 Read Instructions through carefully before beginning assembly.

•  When assembling components, place on a non-abrasive surface

(i.e. shipping box) 

to avoid scratching.

• We recommend an area approx 4’x 8’

 (1.2 m x 2.4 m)

 for unobstructed assembling.

•  You should not need to use excessive force when assembling components. 

Urbanscape Raised Planter Box

A S S E M B LY   I N S T R U C T I O N S

8

1

Not to Scale

1

2

Ver 1.

1

/

072517

7

www.newenglandarbors.com 

www.newenglandarbors.co.uk

Check Box for These Contents 

In the event of missing or defective parts please call our customer service dept. at 

1 800 282 9346

 (Mon. to Fri. 8:00 AM to 4:00 PM EST).

(UK Tel: 

(44) 2038 687160 

(Mon. to Fri.  1:00 PM to 10:00 PM GMT).

Please read through before starting assembly.

1.

Pre-Assembled Side Wall Panels with Posts Connected 

(2)

 

- 10946

2.

Floor Panels 

(

6

)

 

- 10947

3.

Pre-Assembled Front and Back Wall Panels 

(2)

 

- 10948

4.

Floor Supports 

(2)

 

- 10949

5.

Shelf Boards 

(7)

 

- 10950

6.

Shelf Rails 

(2)

 

- 10951

7.

Post Caps 

(4)

 

- 10611

 

4

3

5

6

    8. 

   9. 

 
 

5/8 

(16 mm) 

Stainless Steel Screws 

(4)

 

20016

 

1 1/2 

(38 mm) 

Stainless Steel Screws 

(8)

 

20005

9

53.38" (136 cm)

36" 

(91 cm)

5.75"

(15 cm)

24"

(61 cm)

Summary of Contents for Urbanscape Raised Planter Box

Page 1: ...glandarbors co uk Check Box for These Contents In the event of missing or defective parts please call our customer service dept at 1 800 282 9346 Mon to Fri 8 00 AM to 4 00 PM EST UK Tel 44 2038 687160 Mon to Fri 1 00 PM to 10 00 PM GMT Please read through before starting assembly 1 Pre Assembled Side Wall Panels with Posts Connected 2 10946 2 Floor Panels 6 10947 3 Pre Assembled Front and Back Wa...

Page 2: ...Push the bottom shelf until the tabs lock into place Align and insert the second pre assembled side panel as shown Push down until the bottom shelf rail tabs lock into place 3 2 2 STEP ONE Insert the seven Shelf Boards into the Shelf Rails as shown aside Note that there are tabs located at the ends of the Shelf Boards Push Shelf Boards until tabs are locked into place 1 The Urbanscape Raised Plant...

Page 3: ...oard The boards will be labelled A through F Pressure fit the post caps into place Push until the caps lock into place 3 3 2 STEP TWO Fasten the Pre assembled side panels to the front and back walls using two 1 1 2 38 mm screws for the bottom rails and one of the 5 8 16 mm screw for the top rail Repeat for all four corners 1 1 3 2 B C D E F A A A A ...

Page 4: ...nough to fill the base of the planter as well as the sides Cut slits in the fabric where the root of the plant is located so that the fabric can push down to the bottom of the planter and the root ball is not trapped under the fabric 3 4 2 STEP THREE To plant a hanging plant remove two boards at a time and place the stem between the two boards as shown 1 1 2 4 Fill the planter box with planting so...

Reviews: