Assembly of the Connector:
INFO to the screw driver:
Place bushing and chuck over cable.
Prepare cable as shown.
Important is the stripping length of 25 mm and
12 mm.
Insert wires into terminals and secure clamp
terminals with screw driver (POZIDRIV #
1)
at max. torque 0.8 Nm.
For 6 mm
(AWG 10)
remove screws, clamping
sheet and solder.
Push chuck up to housing .
Finish installation by turning the bushing
onto the connector.
POZIDRIV #
1
Philips
®
2
®
Important: Align the chuck by positioning
the nose into the recess.
DO NOT USE!
A
B
C
D
E
A
B
C
ASSEMBLY INSTRUCTION
NL2FX / NL2FRX
speak
ON
SPX Series
Lockable Loudspeaker Connector
®
R
BDA 348
IMPORTANT SAFETY INSTRUCTION
Electrical Rating acc. UL & CSA:
USR: 40A/250V, CNR: 25A/250V
“CAUTION: NOT FOR INTERRUPTING CURRENT”
“
ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT”
E
Page 1
1.
2.
12 mm [0.5"]
25 mm [1.0"]
1+
1-
1-
1+
D
E
X
Cable O.D.
6.0 - 10.0 mm
[0.24 - 0.39”]
2
Wire size
1.5 - 4 mm
(AWG 12)
ð
