![background image](http://html.mh-extra.com/html/netmedia/nm-irlamp/nm-irlamp_specifications_1674396001.webp)
NM-IRLAMP
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
MAN-IRLAMP REV0707A
Infrared Illuminator
NM-IRLAMP
(SCIR)
Powerful Indoor/Outdoor IR Spotlight
Lets cameras see in complete darkness
Works with NetMedia B/W & Day/Night cameras
Provides 30 degree spot light up to 50 feet
Weather resistant enclosure
Internally routed cables
Mounts directly to walls and ceilings
Mounts to standard electrical fixtures
Tamper resistant wiring
Includes power supply
1 year limited warranty
The NetMedia IRLAMP (SCIR) Infrared (IR) Illuminator provides night vision for IR (850nm) sensitive cameras. It
enables cameras such as NetMedia’s B/W and Day/Night color models to see in complete darkness. It mounts to
a typical round 4 inch junction box. Other junction boxes from your local hardware store may also be used after
replacing the round base with another that has a 1/2 inch diameter hole for the elbow bracket.
IR Illuminators
Behind IR Passing Filter -
850nm IR LED’s provide night
vision for IR sensitive cameras.
DO NOT CUT OR SPLICE THE ILLUMINATOR’S CABLES. MODIFYING THE UNIT IN ANY WAY WILL VOID THE WARRANTY.
Installation Procedures:
1. Connect the 12V DC 300mA Power Transformer from an AC outlet to the Illuminator’s Power Connector.
2. Mount the base to the junction box (not included) and adjust the Illuminator Assembly for proper lighting. Check
camera to ensure that the desired area is illuminated without shining, either directly or by reflection, into the camera
lens. When satisfied, secure all adjustment points.
FEATURES
SPECIFICATIONS
Infrared Illuminators:
Illumination Range:
Power Requirement:
Power Connectors:
Housing Size:
Base Size:
Base Mounting Holes:
Assembly Weight:
64- 850nm LED’s
30 degree spot up to 50 ft.
12V DC 300mA
Female 5.5mm OD, 2.1mm ID, center positive
3.13“ dia. x 4” long
4.5” dia. x 0.75” high x 0.5” hole
3.5” centers
1 lb.
(subject to change without notice)
Elbow Bracket
Adjusts illuminator angle at
base, screw, and housing.
Gasket, Base & Screws
Mount to round 4” junction box.
Power Connector
12V DC 300mA, center positive.
Housing Cap
Protects illuminator.
Locking Ring
Secures elbow bracket to
base at desired position.
Product Includes:
1. Illuminator Assembly (IR LED’s, IR Passing Filter, Housing, Housing Cap,
Elbow Bracket, Locking Ring, Base, Gasket, Power Connector).
2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting Screws.
Housing
Available in ivory.
IR Passing Filter
Hides LED’s in daytime.