1. Name of the product
LED Pro wheel rotator
2. Product code
22611130
3. Colour
As pictured.
4. Short description
This LED projector is energy efficient, emits little heat and is virtually maintenance-free due to the
built-in LED lamp. This projector is extremely suitable to place on a sheet or shelf, but due to the
weight of 3.2 kg less suitable for hanging from the ceiling. Comes with magnetic wheel motor. With
85 mm lens.
5. Content
1x LED Projector
1x Wheelrotator
1x 12V DC Transformer with 2 meter cord.
6. Sensory
stimulations
Sight
7. In Use
Read this user manual before commissioning. Find a suitable location for the projector, taking into
account the following:
This product requires a grounded outlet, in accordance with the specifications on the projector/
mentioned under point 10.
Make sure the projector is focused on a light surface without obstacles.
Do not place the projector at an angle of more than 90⁰, this may cause the
effect and liquidwheel or
other accessories to fall out of the projector at risk of damage and/or injury.
Free ventilation must be possible around the projector, especially at the ventilation grille.
Do not place the projector too close to heat sources such as a radiator.
This product is meant to look at, and does not need to be touched other than when turning it on and
off. However, it may be necessary to touch the projector in the meantime in order to change effects
or liquids.
Mount the projector in a stable location that can support the weight of the projector and accessories,
even if the projector falls. For standing placement, use a central bolt and nut (min. 14 mm e.g.
M10x20mm) and fix the bracket with at least 2 screws e.g. 2x 40 mm (none wood screws).
