background image

Getting Started with the NI PCIe-1429 and 
NI PCIe-1430

The NI PCIe-1429 (NI 1429) and NI PCIe-1430 (NI 1430) are PCI Express (PCIe) image acquisition 
devices. The NI 1429 supports Base, Medium, and Full configuration Camera Link-compatible 
cameras. The NI 1430 supports up to two Base configuration Camera Link-compatible cameras. This 
document describes how to install and configure the necessary hardware and software components to 
begin using the NI 1429 and NI 1430.

What You Need to Get Started

You need the following items to set up and use the NI 1429 or NI 1430:

NI 1429 or NI 1430 image acquisition device

Cameras and cables

NI 1429

Camera Link-compatible camera

One MDR 26-pin Camera Link cable for Base configuration cameras

Two MDR 26-pin Camera Link cables of the same length for Medium or Full 
configuration cameras

NI 1430

Up to two Base configuration Camera Link-compatible cameras

One MDR 26-pin Camera Link cable per Base configuration camera

Computer running Microsoft Windows Vista/XP/2000 with at least one available x4 or larger PCIe 
slot

Note

Visit 

ni.com/info

 and enter 

rdvisionvista

 for more information about 

National Instruments image acquisition device compatibility with Windows Vista.

NI Vision Acquisition Software 8.0 or later, which includes the NI-IMAQ driver software

Optional software for developing applications:

NI Vision Builder for Automated Inspection

NI Vision Development Module

LabVIEW

LabWindows

/CVI

Microsoft Visual Basic

Содержание NI PCIe-1429











Отзывы: