INSTALLATION GUIDE
IMAQ D6826 Breakout Cable
This guide describes how to use the National Instruments D6826 breakout
cable to connect the IMAQ PCI/PXI-1428 image acquisition device to a
Medium configuration Camera Link camera and provide connectivity to
the device’s triggering lines.
The D6826 breakout cable converts the VHDCI connector into an MDR
26-pin Camera Link connector for Medium configuration connectivity and
a 25-pin D-SUB connector for triggering.
Getting Started
The following items are necessary for installing the IMAQ D6826 breakout
cable:
❑
IMAQ D6826 breakout cable
❑
Standard Camera Link cable (For Medium configuration only)
❑
IMAQ 1428 device and documentation
❑
Camera and documentation
™
