background image

W415-1467 / A / 09.30.16

EN

FR
PG
43

INSTALLER:  LEAVE THIS MANUAL WITH THE APPLIANCE.

CONSUMER:  RETAIN THIS MANUAL FOR FUTURE REFERENCE.

NEVER LEAVE CHILDREN OR OTHER AT RISK INDIVIDUALS ALONE WITH THE APPLIANCE.

This wood appliance needs periodic inspection and repair for proper operation. It is against United States federal 

regulation to operate this wood appliance in a manner inconsistent with operating instructions in this manual.

INSTALLATION AND 

OPERATING INSTRUCTIONS

1.27D

Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 

103 Miller Drive, Crittenden, Kentucky, USA, 41030

Phone (705)721-1212 • Fax (705)720-9081 • www.napoleonfi replaces.com • [email protected]

SAFETY INFORMATION

!

WARNING

If the information in these instructions is not followed exactly, a 

fi re or explosion may result causing property damage, personal 

injury or death. Improper installation, adjustment, alteration, 

service or maintenance can cause injury or property damage, 

bodily injury or even death. Please  read entire manual before 

you install and use your appliance. 

This appliance has not been tested with an unvented gas log 

set. To reduce risk of fi re or injury, do not install an unvented 

gas log set into the appliance.

- This appliance can be very hot when burning. 
- Combustible materials such as fi rewood, wet clothing, etc. placed too close 

can catch fi re. 

- Children and pets must be kept from touching the appliance when it is hot. 
- The chimney must be sound and free of cracks. Before installing this unit, 

contact the local    building or fi re authority and follow their guidelines.

- Operate only with the door tightly closed. 
- Burn wood behind the log retainer directly on the fi rebricks. 
- Do not use an elevated grate or otherwise raise the fi re. 
- At least 14 square inches (90.3 square centimeters) of outside air must be 

admitted to the room or directly to the unit through a 4” (101.6mm) diameter 
pipe.

- This appliance is designed to burn natural wood only. Higher effi ciencies and 

lower emissions generally result when burning air dried seasoned hardwoods, 
as compared to softwoods or to green or freshly cut hardwoods. 

- Do not start a fi re with chemicals or fl uids such as gasoline, engine oil, etc. 
- Do not burn trash or garbage, lawn clippings / waste, rubber, waste petroleum 

products, paints or paint thinners / solvents, plastic, materials containing 
asbestos, construction debris, railroad ties or treated wood, manure or animal 
remains, salt water driftwood or salted materials, unseasoned wood, coal, 
charcoal, coloured paper, cardboard, plywood or particleboard. 

- Do not let the appliance become hot enough for any part to glow red.
- KEEP THE STOVE TOP TEMPERATURE BELOW 700°F (371°C). Attempts to 

achieve heat output rates that exceed design specifi cations can result in steel 
distortion and damage.

$10.00

HOT GLASS WILL CAUSE 

BURNS.

DO NOT TOUCH GLASS UNTIL 

COOLED.

NEVER ALLOW CHILDREN TO 

TOUCH GLASS.

!

WARNING

1100ML, 1100C, 

1400ML, 

1400C

LEG MODELS

1400ML Illustrated

MODEL 1100ML, 1100C, 1400ML & 1400C MEET THE 2015 U.S ENVIRONMENTAL PROTECTION AGENCY (E.P.A) CRIB WOOD EMISSION LIMIT FOR WOOD 

APPLIANCES SOLD AFTER MAY 15, 2015, 40 C.F. R. PART 60. THESE STOVES HAVE BEEN TESTED AND LISTED BY INTERTEK TESTING SERVICES TO 

STANDARDS: CSA B366.2, ULC S627, UL 1482. MODEL 1100 HAS BEEN TESTED AND LISTED FOR INSTALLATION IN MOBILE HOMES.

Summary of Contents for W415-1467 / A





















































































Reviews: