791-7135 1 03/04/16
Capacity ............................Up to 40 gallon empty fuel tank
Base Frame .................................................... 12-1/4" x 31"
Rubber Pad (4 each) ................................... 3-3/4" x 5-1/2"
Pad Length Adjustment ................................18-7/8" to 30"
Pad Width Adjustment ........................... 12-1/8" to 18-1/4"
Adapter Plate........................................... 10-3/8" x 12-1/4"
Shipping Weight .....................................................48.5 lbs.
MODEL # 791-7135
CAPACITY: UP TO 40 GALLON
EMPTY FUEL TANK
FUEL TANK ADAPTER
• Read, study, understand & follow all instructions before
using. • User and bystanders must wear eye protection
that meets ANSI Z87.1 and OSHA standards. • Read
the appropriate vehicle service manual for instructions
and procedures on fuel tank removal and installation.
• Always have an approved fire extinguisher accessible for
immediate use. Never use this device near people smoking,
open flames, heat sources or spark. • Consult the device's
owner's manual for instructions on grounding requirements
for metal tanks before performing any work. • Always drain
the fuel tank into a grounded storage container before
removal or installation. • Make sure the fuel tank is centered
and balanced on the adapter and jack before removal or
installation. • Always secure the fuel tank to this device
with the tie-down straps provided before moving the fuel
tank. • The fuel tank may only be transported when the jack
has been retracted to its lowest position. • This product
contains chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands thoroughly after handling.
• Failure to heed
these warnings may result in serious or fatal personal injury
and/or property damage.
SPECIFICATIONS
WARNING
BEFORE USING THIS DEVICE, READ THIS
MANUAL COMPLETELY AND THOROUGHLY,
UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND
MAINTENANCE REQUIREMENTS.
It is the responsibility of the device owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels are lost
or not legible, contact NAPA for replacements. If the operator is not
fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
