8
9
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
Precautions
Assemble
Instructions
Warning Indications about Product Liability
●
This kit includes a small screwdriver, the only tool necessary for assembly.
●
This kit contains several very small parts. Be careful not to drop or lose any parts.
●
This kit contains optical lenses. Handle the lenses with care to avoid damaging or dirtying
them. Scratches or stains on the translucent surfaces of the lenses may interfere with
detailed observations.
If the surfaces do become dirty, clean them gently with a cleaner for cameras or eyeglasses
in order to avoid scratching them.
●
This kit does NOT contain a tripod for telescope observations. The telescope can be mounted
to most still/video camera tripods.
●
For your own safety and the safety of the telescope, please read the Important Notes at the
end of this document before using.
●
Adult supervision is strongly suggested for children when using the telescope.
Please read this section with your parent or teacher.
This NAOJ Telescope kit requires
some assembly. Follow these
instructions to complete the
telescope and observe many
kinds of celestial objects.
●
Do NOT walk while using this telescope. You may trip or collide with a person or object
resulting in injury.
●
Keep this telescope stable. If the telescope falls it may cause injury to people or damage to
the telescope itself.
●
Keep a close eye on children to prevent them from placing the lenses or other small parts
into their mouthes.
●
The included screwdriver has a sharp tip. Handle with care.
●
NEVER observe the Sun with this telescope. Extremely strong sunlight can cause serious
damage to your eyes, possibly inducing permanent blindness.
●
Do NOT put this telescope in direct sunshine. It could accidentally focus the Sun's rays and
start a fire.
NAOJ Telescope kit
This kit does NOT contain
a tripod for telescope
observations.
WARNING
NOTICE
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
List of Parts
Assembly Procedure 1
[Telescope Body]
First of all, check to see that your package contains all the necessary parts.
●
Body Tube :
ⒶHalf Tube x2
ⒷLock Ring
●
Draw Tube :
ⒸHalf Tube x2
●
Eyepieces :
ⒹEyepiece (large)
ⒺEyepiece (small)
ⒻEye Pad x2
ⒼEyepiece Attachment
●
Optical Parts :
ⒽPrimary Lens
ⒾⒿEyepiece Lens set (large)
ⓀEyepiece Lens set (small) x2
The body parts come pre-assembled, but you will
need to disassemble them to install components
inside.
1.
Turn the screw-type
Lock Ring
Ⓑ to detach.
2.
The two halves of the
Body Tube
Ⓐ and the
Draw
Tube
Ⓒ should separate easily.
●
Assembly Tools:
ⓁTripod Connection Nut
ⓂScrews (long) x4
ⓃScrews (short) x4
ⓅScrewdriver
ⓆGuide Ring for camera
ⓇLuminous Sticker
Preparation of Tube Parts
1
Detached Lock Ring.
