Model Code
Attachable Blade
Cut Depth
Weight
Cutting Material
Dust Bag capacity
Proper Grinders
-1-
BOSCH
MAKITA
HITACHI
NK-125
INSTRUCTION MANUAL
WARNING
OVERVIEW
SPECIFICATIONS
・The supplied connecter may not connect securely to disc grinders. In this case, do not use TORNADO.
・TORNADO is for use when cutting concrete, stone and brick. Do not use when cutting metal or other materials.
Do not use with any other type of cutter, such as a grindstone or tipped saw.
・Always check TORNADO for damage, cracks or deformation before use.
Do not use TORNADO which is damaged, cracked or bent as this could lead to injury.
・Be sure to wear protective goggles, a dust mask, protective footwear, earplugs and other protective equipment when working.
・Keep TORNADO away from gasoline, thinner, petroleum and paraffin.
・Hold the workpiece with clamping devices.
[a] Main Unit [b] Dust Bag [c] B-Connecter [d] M-Connecter
[e] H-Connecter [f] M4 Screw [g] Cup Washer [h] Spacer (T4.5)
[ i ] Spacer (T7.3) [ j ] Spacer (T9.4) [k] Spacer (T12.6) [m] Base Flange
[n] Foot Plate [p] Flat Screw [q] Wrench [r] Setscrew
PREPARATION
WARNING
Guard
SW
Take the Guard off.
Remove the Screws.
Turn the Grinder Body to locate the SW upper position.
Tighten the Screws.
CONNECTER INSTALLATION
[c] B-Connecter
[d] M-Connecter
[e] H-Connecter
[a] Main Unit
[f] M4 Screw
[g] Cup Washer
Choose the proper connecter and fit it to [a] Main Unit
with [f] M4 Screw and [g] Cup Washer.
・Be sure to turn off the disc grinder and remove the plug from the electrical outlet before attaching TORNADO.
・If you attach TORNADO to a disc grinder but the connector is loose and cannot be securely attached, do NOT use TORNADO.
Using it in this state could lead to injury.
a
b
c
d
e
h
i
j k
p
n
m
N300129
f g
GWS6-115/GWS7-115(E)/
GWS8-115/GWS8-125/
GWS9-125/GWS10-125/
GWS11-125CI(E)/GWS14-125CI(E)(T)/
GWS15-125CIH(CIEH)(CITH)
9554NB/9558NB/GA4530/9565CV
G12SS/G12SR3/G13SR3/
G13SB3/G13SE2
BOSCH:
MAKITA:
HITACHI:
GWS8-115/GWS8-125
GWS10-125/GWS11-125CI
GWS14-125CI(E)(T)
GWS15-125CIH(CIEH)(CITH)
GWS6-115
GWS7-115
GWS9-125
GWS8-115/GWS8-125/GWS10-125/
GWS11-125CI/GWS14-125CI
Remove O-Ring
if it is equipped.
O-Ring
NK-125
125mm/T1.5-2.2 Diamond Blades.
5-30mm
520g (Main Unit)
Concrete, Block, Stone, Tile, ..etc.
Should be epmtied with every 3m of cutting.
q
r
