![background image](http://html1.mh-extra.com/html/multi/mcd-009/mcd-009_instruction-manual_1853890001.webp)
Thank you very much for selecting our model MCD-009 pocket
digital multimeter.
This model is complex instrument and employ a very reliable
mechanical/electronic design.
Before you use your new instrument, read this Instruction
Manual completely and familiarize yourself thoroughly with
all functions. With proper use and care, your tester will give
you years of satisfactory service.
MULTI MEASURING INSTRUMENTS CO.,LTD.
Akihabara Murai Bldg. 7F, 1-26 Kanda Sakuma-cho,
Chiyoda-ku, Tokyo, 101-0025 Japan
TEL : +81-3-3251-7016 FAX : +81-3-3253-4278
Home Page :
SAFETY SUMMARY
observe by all means
The Cautions and Warnings which appear on the following must be followed to ensure
operator safety and retain the operating condition of the multimeter.
△
!
WARNING : This symbol indicates the contents "Possibilities of the death or
the serious wound can be supposed" caused from mis-operations.
△
!
CAUTION : This symbol indicates the contents "Possibilities of the injury or
only the material damage can be supposed" caused from mis-
operations.
●
The CAUTIONs and WARNINGs which appear on the following pages are stared
to prevent the operator & other people from the dangers and their properties from
the damages beforehand.
△
!
WARNING
TRUE RMS POCKET DIGITAL MULTIMETER
MODEL MCD-009
INSTRUCTION MANUAL
POSSIBLE ELECTRICAL SHOCK
●
This instrument is for the use of low voltage circuit.
●
Do not make measurements of power lines carrying more than AC 250V.
(In some cases, power lines may carry voltage spikes of several times of the normal
supply voltage).
●
Do not make measurements, leaving battery cover removed.
●
Before attempting to replace the batteries, first disconnect the test leads from any
energized circuit.
●
Do not handle the instrument with wet hands.
It is very dangerous, when measuring voltage is high.
POSSIBLE DAMAGE OF INSTRUMENT
●
When making resistance measurement, continuity test or diode test, do not apply
any voltage to the test probes. It will cause the defect.
●
Confirm the position of rotary switch before measurement.
●
Keep storage this instrument in cool and clean place.
●
For cleaning of this instrument, do not apply chemicals such as thinner, benzine, etc.