www.morelhifi.com
SUBWOOFER POSITIONING
Fig. 1
Fig. 3
Fig. 2
Full 5.1 surround
Stereo only
To avoid personal injury, install the subwoofer in a location where any rear amplifier parts such as
panels and/or heatsinks, etc. cannot be accidentally touched.
For home theatre application with receivers that
include a “Sub Out” feature (the most common
connection method of surround receivers) Connect
all speakers directly to the receiver. Adjust your
receiver’s speaker configurations as follows: Set
Front, Center and Surround speakers to “small” or
“large” according to speaker size and bandwidth.
Receiver Settings:
Front, Center and Surrounds= “small/large”
Subwoofer=”ON”, or “YES”, or “PRESENT”
Set the crossover frequency on the receiver to
60-150Hz depending on speaker bandwidth.
Consult your receiver’s owner manual for speaker
configuration. Usually, a satellite speaker would be
set to “small” and “big”/ floor standing speaker,
would be set to “large”.
SUBWOOFER CONNECTION
Bass notes are Omni-directional and therefore become less directional as they go down in frequency. For
best sonic Integration with your speakers, positioning your subwoofer in-front of the listening area will usually
provide the best bass performance (Fig 1).
If such position is not possible your subwoofer may be placed anywhere in the room, this will slightly affect
the stereo image of your front speakers or the soundstage of your multichannel speaker system.
PLEASE NOTE:
- Corner placement provides the most bass, but sometimes at the expense of accuracy.
- Usually a subwoofer placed near a wall will provide a good balance of power and accuracy.
- Controls are provided to align your subwoofer’s output with that of the other speakers in your system.
Product Disposal—
Certain international, national
and/or local laws and/or reg-
ulations may apply regarding the
disposal of this product. For further
detailed information, please
contact the retailer where you
purchased this product or the Morel
Distributor in your
Morel’s distributors can be found
at the website:
country.
morelhifi.com
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions.
2. Keep these instructions.
3. Read all warnings.
4. Follow all instructions.
5. Do not use the subwoofer near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding
prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
15.
WARNING:
To reduce the risk of fire or electric shock, this apparatus should not be exposed to
rain, moisture and objects filled with liquids. should not be placed on this apparatus.
16. To completely disconnect this equipment from the mains, disconnect the power supply cord
plug from the receptacle.
17. The main plug of the power supply cord shall remain readily operable.
SUB WOOFER USER MANUAL
TM
SPECIFICATIONS SOUNDSUB
Morel operates a product design improvement policy consequently specifications are subject to alterations without prior notice
When connectiong to a stereo amp:
Center and rear speakers are not in use
10
50
LI NE I N
LE V EL
0
W IR EL E S S I N
H z
L FE
F R E QU E NCY
200
Hz
PH ASE
0
180
120-240V~ 50/60Hz 1.6A
P O W ER
10
50
LI N E IN
LE V EL
0
W I R ELE S S IN
H z
L FE
F R EQ U E N CY
200
Hz
PH ASE
0
180
120-240V~ 50/60Hz 1.6A
P O WER
