Packaging materials and appliance are made from recyclable materials.
Seperation of the remaining waste materials into different types
facilitates the recycling of valuable raw materials. When the appliance
is to be no longer used please dispose of the appliance in the proper
manner.
This Symbol on the product indicates that it should not be
disposed in the normal houshold waste. Please take it to a
recycling point for electrical and electronic appliances to be
recycled in a proper manner.
Also rechargeable batteries which are dead or defective should not be
disposed of in the household rubbish; always take them to a special
waste disposal and make an important contribution to protecting our
environment. Please obtain information on disposal from your local
authority.
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen
und sorgfältig aufbewahren.
Please read the instruction manual fully, before using the product.
Keep the manual for the entire life of the product.
ENHANCING AMBIANCE
•
•
Bedienungsanleitung (DE)/ Instruction Manual (EN)
Mod. 20-02-03
2.4 GHz WIFI CONTROLLER
2.4 GHz RF
Products
k) Grouping Multiple 2.4 GHz LED Products/ Bulbs
If you wish to control multiple products and bulbs at the same time,
you can link them to one of the 4 zones. Repeat section (a) for each
product/ bulb under the zone of your choice.
l) Controlling various Zones
Now you have various products/ bulbs linked to different zones. Press
‘Zone On’ button to control the selected zone only. To return control to
all zones press ‘Master On’.
m) Functions
• To turn all lights white, press and hold ‘Master On’.
• To turn a selected light zone white, press and hold your chosen
‘Zone On’.
• Scroll the colour ring to select any colour.
• Press the mode button to navigate through a selection of light
programmes.
• Use the +/- speed buttons to adjust the programmes.
f) Reconnect to your WIFI Network
• Now, select the ‘Configuration’ tab at the bottom of the app screen.
• Select the name of the initial wifi network you were connected to,
before connecting to the WIFI Controller.
• When this is complete, you will automatically return to the ‘device
list’ page.
• Refresh the ‘device list’ then select the ‘MiLight’ WIFI Controller.
Your device is now connected to the WIFI Controller.
• If you wish to change the name/ image of the WIFI Controller visible
on the ‘Device List’ you can do so on the ‘information’ tab.
g) Linking the Application with the 2.4 GHz LED Product/ Bulb
Now that your mobile device is connected to the WIFI Controller, you
need to link your mobile device to the 2.4 GHz product/ bulb. Select
the remote button on the bottom left of the app, then refer to section
(h) to continue.
Now open the ‘Moree’ application. The first page you will be taken to
is the ‘device list’.
Select the device named ‘milight’
e) Connect your Device to the WIFI Controller
Go to your wifi settings on your mobile device. You must search for
the network ‘milight’ Connect to this network. The ‘Link’ indicator
should illuminate.
h) Moree Remote APP for Smartphone/ Tablet
Insure you have sucessfully installed your WIFI Controller (Sections a
- g).
On the Moree app, please choose the bottom left remote, then look
at the image below to become familiar with the basic controls of the
application.
Colour Wheel
Speed -
Zone Off
Speed +
Brig/-
Programme
selection (Mode)
Master ON/ OFF
(all Zones)
Zone ON
(Long Press= white)
Zone 1-4
Reconnection
to WIFI Network
Moree Remote APP
The device can be safely transported in the original packaging. If
insufficient protective packaging is used, the customer is liable for any
damages during transportation.
PLEASE KEEP THE ORIGINAL PACKAGING AND USE IT, IF POSSIBLE,
IN CASE OF WARRANTY, OR RETURN OF THE EQUIPMENT.
Refer to our website for the latest information about our products.
www.moree.de
Moree Ltd.
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
Products are subject to change.
Distribution
Maintenance
• Make sure that the power supply is disconnected before cleaning.
• Clean the product with a soft, dry cloth only. Do not use abrasives,
alcohol or solvent based cleaners.
Disposal/ Ecology
ML 2.4 GHz WIFI Contr
oll
er DE-EN V1.0 © 2016 Mor
ee Ltd.
Orignal Packaging
Milight
Gerät
i) Linking with the 2.4 GHz LED Product/ LED Bulb
First, you must turn off the LED lamp/ LED product on the cord switch
or turn off the power by the light switch or unplug the power cord.
Turn it back on, and within 2 seconds press and hold ‘Zone On’ on the
Zone number that you wish the bulb to be a part of. When you have
succesfully synced the remote control to the product/ bulb, it will flash
3 times. Please see section (k) for grouping multiple products/ bulbs
together.
j) Unlink with the 2.4 GHz LED Product/ Bulb
If you wish to unlink the Remote Control with the product/ bulb, follow
the same steps a section (h), but select the Zone the product/ bulb is
currently on. The successful unlinking with the RGBW Lightbulb will
result in the bulb flashing 6 times. You must do this before you can
relink to a new zone.
Apple, the Apple logo and iPhone are trademarks of Apple Inc., registered
in the U.S. and other countries. App Store is a service mark of Apple Inc..
Android is a trademark of Google Inc.
