AT-AFIFG Air Crimp Tool Head
Doc. No: ATS-640054300
Release Date: 10-01-03
UNCONTROLLED COPY
Page 1 of 6
Revision: B
Revision Date: 05-05-04
Air Powered
Crimp Tool Head
AviKrimp™
Application Tooling
Specification Sheet
Order No. 64005-4300
Engineering No. AT AFIFG
FEATURES
Quick-change tool head for the 19279-0001 (AT-200)
Tooling kit is interchangeable with other kits in the 64001 and 64003 Series
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position.
Pneumatic powered crimp tools help reduce fatigue and discomfort from repetitive manual crimping
SCOPE
Products: AviKrimp™ Fully Pre-Insulated and-Insulated Quick Disconnect Flags 14-22 AWG. This tool head is
intended for use in the 19279-0001 (AT-200) either hand held or with optional bench adapter 19078-0307
(ATBA) and foot switch.
Testing
Mechanical
The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections.
The following charts show the UL and Government specifications (MIL-T-7928) for various wire sizes. The
tensile strengths are shown in pounds, and indicate the minimum acceptable force to break or separate the
terminal from the conductor.
Wire Size (AWG)
*UL - 310
22
8
20
13
18
20
16
30
14
50
*UL – 310 – Quick Disconnects
The following is a partial list of the product part numbers and their specifications that this tool is designed to
run. We will be adding to this list and an up to date copy is available on www.molex.com.
Wire Size: 18 – 22 AWG 0.80 – 0.35 mm²
Terminal No.
Terminal
Eng. No. (REF)
Wire Strip
Length
Insulation
Diameter Max.
In. mm
In.
mm
19006-0001
AA-5220
.344 8.73 .150
3.81
19006-0005
AA-5222
.344 8.73 .150
3.81
19006-0008
AA-5223
.344 8.73 .150
3.81
Wire Size: 14 – 16 AWG 2.00 – 1.30 mm²
Terminal No.
Terminal
Eng. No. (REF)
Wire Strip
Length
Insulation
Diameter Max.
In. mm
In.
mm
19006-0011
BB-5221
.344 8.73 .170
4.32
19006-0015
BB-5224
.344 8.73 .170
4.32
19006-0017
BB-5225
.344 8.73 .170
4.32
