Tool Kit for P-Lock Flag Female Terminal
Doc No: ATS-6382567HM Release Date: 03-19-13
UNCONTROLLED COPY
Page 1 of 8
Revision: A
Revision Date: 03-19-13
STRIP LENGTH
INSULATION CRIMP
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR CRIMP
TWISTING
CUT-OFF TAB
SEAM
Application Tooling
Specification Sheet
Tool Kit
Order No. 63825-6770
Hand Crimp Tool
Order No. 63825-6700
FEATURES
%
A full cycle ratcheting hand tool ensures complete crimps
%
Ergonomically designed soft handles
%
Precisely designed crimping profiles with simple contact positioning
%
Easy handling due to outstanding force ratio
Tool kits are easily installed into the Hand Crimp Tool or the 63816-0300 Power Crimp Head which is installed
into the 63816-0200 (110 V) or the 63816-0250 (220 V) Battery Powered Tool.
Many different Tool kits can be used with a single Battery Powered Tool.
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant.
Separate Punch set for 24 AWG wire and separate punch set for 2 x 24 AWG wires, one anvil set.
SCOPE
Products: 2.8 (.110”) P-Lock Flag Terminal 24 AWG and 24 + 24 AWG.
Terminal
Series No.
Terminal Order No.
Available in Reel form only
Wire Size
Insulation Diameter
Strip Length
Terminal
AWG
mm²
mm
In.
mm
In.
104442
104442-9702
24
N/A
1.45-1.55
.057-.061
3.40-3.90
.134-.154
24 + 24
N/A
1.00-1.30
.039-.051
The terminals above are reeled parts only. Customer to cut off terminal from reel: 0.50mm (.020”) maximum
.
Overall insulation OD specification for terminal.
DEFINITION OF TERMS
TYPE 4C
