background image

 

FCC Compliance and Advisory Statement

 

LABELLING REQUIREMENTS (Part15,Section15.19(a)(3)) 

 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions : (1)this device may not cause harmful interference, and(2)this device must accept 
any interference received, including interference that may cause undesired operations

 

INFORMATION TO THE USER (Part 15. Section15.105(b)) 
INFORMATION TO THE USER 

 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one more 
of the following measures:   
 

1) Reorient or relocate the receiving antenna. 
2) Increase the separation between the equipment and the receiver. 
3) Connect the equipment to an outlet on a circuit different from that to which 
the receiver is connected. 
4) Consult the dealer or an experienced radio/TV technician for help. 

 

WARNING(Part 15, Section 15.21) 

 
Any changes or modifications not expressly approved by the Jun telecom Inc. could void the 
user`s authority to operate the equipment. 
Where shielded interface cables have been provided with the product or specified additional 
components or accessories elsewhere defined to be used with the installation of the product, 
they must be used in order to ensure compliance with FCC regulations

 
 
 

Canadian DOC Statement

 
Suggested text for the notice indicating compliance with this Standard: 
 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada

.

 

 

 

Summary of Contents for MW-200



































Reviews: