Device Overview
How to wear your Q-Band EX?
User Manual
Q-66
Q-Band EX
EN
Wear Q-Band EX on your wrist
1
2
3
4
Charge your Q-Band EX
Fasten Q-Band EX with clasp
Change the wristband
Put on the wristband with the screen facing up and the band
wrapped around your wrist. Slide one band through the loop of
the other band, and align the clasp along the band to find the
holes where best fit the clasps.
Squeeze both clasps into the holes on the wristband until you hear a
click, indicating the band is securely fastened.
Note: The watch band is replaceable and both side wearable/reversible.
Spread open both bands with the screen facing up, and press down the screen with
your thumb until the core comes off the wristband.
Insert the core with screen facing up into the notch from below the wristband. Make
sure the two tenons on each side of the core are securely fixed into the corresponding
slots in the bands.
Important Notice:
Failure to follow the instructions above might cause damage to the device.
Prior to charging Q-Band EX, make sure it is securely placed inside the charging box
with the lid closed, and the USB connector is plugged in to a computer or a power
source via a power adapter.
Important Notice:
The product is shipped with the screen and keys locked, and will be unlocked once it is
charged via USB connection. Please make sure the "Charging" icon appears while it is
being charged, indicating the device is connected correctly and getting charged.
Video Demo:
http://ww2.voiis.com/igotu-life/charge/Q-Band-HR
1.
2.
1
2
Reversible Wristband
Clasp
Core
Touch Button
Metallic contact for charging
2
3
4
Charging icon
(1)Push
(2)Up
1
