Connecting your Android device to the PowerLIft Pro control box via Bluetooth
The following steps are only performed once. After you add the Bluetooth control box as a
trusted device, you can seamlessly connect to it without having to search for it again.
Turn on the PowerLift control box. You will see a small red blinking light on the front of the
control box.
On the tablet go into the
Bluetooth settings section on
your android device and click
Search
Under Available Devices, you
should see
MLCS-PowerLift-
Pro
. (Note: There is a short
lag where the PowerLift-Pro
will appear)
Tap on MLCS-PowerLift-Pro to
pair with this device.
