background image

 

 

Note: This manual is published in accordance with ISO standard 10240:1995E Small Craft - Owner’s Manual 

MJM Yachts LLC 

89 Pinckney Street, Boston MA 02114 

Tel 617-723-3629 Fax 617-723-3629 

 
 
 

 

                           2009 

 

 

 

 

 

 

 

 

 

 

                   

 
Dear 29z Owner:                         
 
Congratulations on becoming Captain and Owner of the world’s best built and most fuel efficient yacht of its size.  The 
enclosed copy of the 29z Owner Manual should further contribute to your enjoyment and proficiency afloat.   
 
This manual was created jointly with Zurn Yacht Design, Boston BoatWorks and MJM Yachts.  Our experience with the first 
64 of the 34z’s and 33 of the 29z’s has been incorporated to make this manual as useful and relevant as possible.  Keep in 
mind that there maybe some variances such as location of the breakers on the panel. And, from time-to-time we will change 
specifications to keep pace with changes made to improve the boat.   
 
When addressing a problem with a specific piece of equipment, this 29z Owner’s Manual is to be regarded only as a 
preliminary source of information.  The equipment manufacturer’s own manual with trouble-shooting procedures, etc. is the 
primary source and authority. 
 
A National Marine Manufacturer’s Association (NMMA) publication 

Sportfish, Cruisers, Yachts 

accompanies, and forms 

part of, this 29z Owner’s Manual.  This booklet has many universal handling and operating tips worth reviewing.  
 
This Owner’s Manual is designed to be a living document, not only for builder updates but for your own use and record.  
Each boat is provided with a copy of the current Manual organized in a STAPLES “Mini-Ring” type binder that allows you 
to add pages as needed. 
 
One of the great advantages of purchasing a series-built or semi-custom design is that owners have the benefit of learning 
from one another.  So, with your continued input and comments we can keep adding useful information and helpful hints to 
this manual. 
 
Part of the ISO CE Mark Certification Program is confirmation by the owner that the manual has been received.  Please sign 
the extra page No. 3 included in the Manual as a receipt and return it in the stamped envelope provided. 
 
Best wishes for fair winds and sunny skies.   On behalf of the builder and designer, we are most appreciative, and I am 
particularly honored, that you have chosen the 29z. 

 

 

 

 

 

 

 

 

    

 

 
 
 
Robert L. Johnstone

 

Chief Operating Member 
 
 
 
 
 
 

Summary of Contents for 29z















































Reviews: