Page 1 of 4
WML-C95_User_Manual
User Manual
MITSUMI Bluetooth HCI Module
MODEL WML-C95
The purpose of this manual is to explain correct way how to integrate module WML-C95 to the end product. It
includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that
shows how module and OEM product, where module integrated, complies with regulations in certain regions. Any
modifications, not expressly approved by the manufacturer could void the authority to operate in these regions.
Content
1. General
2. Product Information
3. Federal Communications Commission Interference Statement
4. Industry Canada Statement
1. General
This MITSUMI Bluetooth HCI Module, model WML-C95 has to be installed and used in accordance with the
technical description/installation instructions provided by the manufacturer.
For detail information concerning type approval of this module, please contact the authorized local distributor or
manufacturer.
The system may only be implemented in the configuration that was authorized. Note that any changes or
modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to
operate this equipment.
2. Product Information
WML-C95 is a Bluetooth HCI Module. The specification is shown in the following.
Power Supply
VBAT:DC 2.97V to 3.63V (3.3V Typ)
VIO:DC 1.7V to 1.98V (1.8V Typ) or 2.97V to 3.63V (3.3V Typ)
Bluetooth
Version
Bluetooth V4.0 BDR/EDR+LE
Carrier Frequency
2.402GHz to 2.480GHz
Output Power
0 dBm (Class 2)
Hopping 1600hops/sec
Modulation Method
GFSK, PI/4-DQPSK, 8DPSK
Data rate
GFSK: 1Mbps , PI/4-DQPSK: 2Mbps , 8DPSK: 3Mbps
Host interface
UART, PCM (I2C)
