background image

1

GB

Hand dryer

1209875HF0401

MODEL

JT-MC206GS-W-E

Unit color

-W

White

INSTRUCTION MANUAL

Read the manual thoroughly before using the unit to ensure it is used safely and correctly. 

After reading the manual, store it in an easily accessible location for future reference.

You should not attempt to install the unit yourself, 

as this may affect the safety and functionality of the unit. 

This unit is intended for the purpose of drying hands and is not covered by a warranty if used for any other purpose. 
It has no sterilizing or disinfecting functions.

INDEX

Safety Precautions

 

 

 

2

Names of Parts

 

 

 

3

How to use the unit

 

 

 

4

How to open/close the front cover

 

 

 

4

Precautions for when opening/closing the front cover

 

 

 

4

Turning the power on

 

 

 

5

If not using for a long period

 

 

 

5

How to use the unit

 

 

 

5

Turning the heater on

 

 

 

6

Adjusting the air speed

 

 

 

6

Maintenance

 

 

 

7

Precautions for when opening/closing the front cover

 

 

 

7

Turning the power off before maintenance

 

 

 

8

Cleaning the unit exterior and hand drying area

 

 

 

8

Cleaning the air filter

 

 

 

9

Cleaning the drain tank

 

 

 

10

Trouble shooting

 

 

 

11

Specifi cations

 

 

 

12

Location of Model Name display
Location of power supply voltage display

Single-phase 220 – 240V AC

For User

Summary of Contents for JT-MC206GS-W-E
















Reviews: