Minolta QuickScan 35 Instruction Manual Download

Page: 1 / 32

Thank you for purchasing the Minolta QuickScan 35. The QuickScan 35 enables you to scan both

negative and positive, color and monochrome (black & white) 35mm film using the Macintosh.

The main features of the QuickScan 35 are as follows:

• High-speed scanning with 3-line sensors

• High-quality images with a maximum of 2820 dpi

• Easy, versatile software

The Minolta QuickScan 35 is packaged with an Adobe Photoshop plug-in software and an

independent Utility software. Before beginning to use the QuickScan 35, you should have a working

knowledge of the Macintosh and its operating conventions. You should know how to use the mouse

and standard Macintosh menus and commands.

Adobe Photoshop™ is a registered trademark of Adobe Systems Inc.

Macintosh™ is a registered trademark of Apple Computer, Inc.

Other corporate names and product names are also registered trademarks

Changes or modifications not approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Summary of Contents for QuickScan 35

































Search results

Summary of Contents for QuickScan 35

Reviews:

Related manuals for QuickScan 35

Brands by name

Popular brands

Minolta QuickScan 35, Instruction Manual

Search results

Summary of Contents for QuickScan 35

Reviews:

Related manuals for QuickScan 35

Brands by name

Popular brands