1
Step 2:
Install Software
Step 1:
Unpack Contents
Start Here
Installing your Microtek ScanMaker s460
Unpack your scanner package and check for
major components.
1. ScanMaker s460 scanner
2. Power adapter
3. Software CD
4. Hi-Speed USB cable
5. LightLid 35 Plus II*
Important
: Do not remove the yellow
stickers from your scanner until you are
told to do so. You must install software
before connecting your scanner.
Always close any open programs and turn
off Anti-virus utilities before installing
software.
Copyright © 2014 Microtek International, Inc. http://www.microtek.com
I49-004214 B, March 2014
* The LightLid 35 Plus II is either as a standard
equipment or an optional accessory depending
on the scanner configuration that you
purchased.
1
5
4
3
2
A.
Place the
Microtek CD-ROM
into the CD-ROM drive.
B.
Follow the on-screen instructions to install the driver and software.
NOTE
: If the Microtek Software Installer screen does not come up automatically, double-click the
following in succession: “My Computer”; the CD-ROM icon; then cdsetup.exe to start the installer
program.
