P/N 83-210038 Rev
D
1
Quick Start Guide
MS-3 CCD Reader
This guide is designed to get your reader up and running quickly.
When connected to a host computer with Windows operating
system (98 or above), you can use ESP (Easy Setup Program) to
configure and control your MS-3 CCD Reader. In addition to ESP,
you can send commands to your reader by serial command.
For a full explanation of the MS-3 CCD’s commands and features,
refer to the Help section of ESP or contact your Microscan sales
representative for the MS-3 CCD Reader User’s Manual,
available
in digital and print formats.
