1.
Warnings
Connect the power supply and the display-/output device according to the safety
regulations for electrical equipment. The power supply must not exceed the specified
limits.
> Risk of injury, damage to or destruction of the sensor
Avoid shocks and impacts to the sensor. Avoid continuous exposure to dust and
spray on the sensor. Avoid exposure of sensor to aggressive materials (detergents,
cooling emulsions).
> Damage to or destruction of the sensor
Read the detailed instruction manual before operating the sensor. You will find this
manual on the provided CD or online at www.micro-epsilon.com.
2.
Notes on CE Identification
The following applies to the scanCONTROL 30xx/BL:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU, „RoHS“ category 9
The sensor is designed for use in industry and satisfies the requirements.
The sensor fulfills the specifications of the EMC requirements, if the instructions in the
manual are followed.
3.
Proper Environment
- Protection class:
IP 67
- Operating temperature: 0 to +45 °C (+32 to +113 °F), by free circulation of air
- Storage temperature:
-20 to +70 °C ( -4 to +158 °F)
- Humidity:
5 - 95 % (non condensing)
4.
Scope of Delivery of scanCONTROL
30xx/BL
- 1 Sensor scanCONTROL 30xx/BL with integrated controller
- 1 Multifunction cable PCR2600/2900-5, length 5 m; for power supply, trigger and
RS422; screw connector and free cable ends
- Calibration final inspection / assembly instructions
- 2 protective caps
- scanCONTROL Sofware-CD with drivers, programs and documentation
Assembly Instructions
scan
CONTROL
3010/BL / 3060/BL
Summary of Contents for scanCONTROL 3010/BL
Page 11: ......
