MICRO-EPSILON scanCONTROL 30 BL Series, Assembly Instructions Manual

Page: 1 / 12

Page 1 scanCONTROL 3010 / 3012
Assembly Instructions
scan CONTROL 3010 / 3012
1. Warnings
Connect the power supply and the display-/output device according to the safety
regulations for electrical equipment. The supply voltage must not exceed the specified
limits.
> Risk of injury, damage to or destruction of the sensor
Avoid shocks and impacts to the sensor. Avoid constant exposure of the sensor to dust
and splashes of water. Avoid exposure of sensor to aggressive materials (detergents,
cooling emulsions).
> Damage to or destruction of the sensor
Read the detailed operating instructions before operating the sensor.
These instructions are available online at
www.micro-epsilon.com .
2. Notes on CE Marking
The following apply to the scanCONTROL 30xx:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
The sensor is designed for use in industrial applications.
The sensor fulfills the specifications of the EMC requirements, if the instructions in the
operating instructions are followed.
3. Proper Environment
- Protection class: IP67
- Temperature range:
ƒ
Operation: 0 ... +45 °C (+32 ... +113 °F), for free circulation of air
ƒ
Storage: -20 ... +70 °C ( -4 ... +158 °F)
- Humidity: 5 - 95 % (non-condensing)
Inhalt
1. Warnings 1
2. Notes on CE Marking 1
3. Proper Environment 1
4. Laser Safety 2
Laser Class 2M 2
Laser Class 3R 2
5. Connections, LED Displays 3
Multifunction Port 3
RS422, Synchronization 4
Trigger, Encoder, Mode Switching 4
External Laser Switch-off, Optional 4
LED Displays 5
6. Transmitting Measurement Results 6
7. System Requirements 6
scanCONTROL Configuration Tools 6
scanCONTROL 3D-View 6
8. Quick Start, Initial Operation, Software 7
9. First Profile 8
10. How to Access Profile Data 8
11. scanCONTROL Gateway 9
12. scanCONTROL 30xx with scanCONTROL Output Unit for Connecting to a PLC 10
Connecting the Supply Voltage 11
13. Unpacking, Included in Delivery 12
14. Additional Information 12