Merlin SonicZ, Quick Start Manual

Page: 1 / 3

1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Product Overview
SonicZ
Usage
Take out both 2 earbuds then re-insert them back into the case to
activate the earphones.
Note: If earbuds fail to be charged, please charge the case via USB
cable.
How to pair:
- Take out the Earbuds from the case, they will auto power on
and pair with each other.
- Left Earbud will auto enter into pairing mode while LED light on
right Earbud will be turn off.
- Search for “ SonicZ ” on mobile devices and tap to pair to both
Earbuds.
Reset:
Please try the following steps if fail to connect with the mobile
device.
- Take out the two earbuds, press the button for 3s, the LED
lights turn off.
- Press the button for 10s, the LED lights will be on in red and
white at the same time, then the lights will turn off.
- Put the two earbuds back into the charging case again, then
take out from the case, it will auto turn on and pair with each
other.
- Search for “ SonicZ ” on the mobile devices and connect it with
the earbuds.
Wearing:
- Put the Earbuds into ears lightly with mic towards to the front
side.
Charging:
Charging the Earbuds:
Insert the Earbuds into the charging case (Pogo pins should be well-
connected) LED light will be Red while charging and turns into
White(will be last for 60s) once full charged.
Charging the Case:
Note: There are 4 LED lights to show the charging case battery
status, its means there is 25%, 50%, 75%, 100% battery in sequence.