1
3. Bluetooth Pairing
To pair:
a) Turn on the ActiFit Go V3 bracelet.
b) Turn on the Bluetooth of your phone.
c) Download the “H Band App” by scanning the QR code
below.
d) Open the app on your mobile phone and tap the
disconnected button. After searching the app will display
the name of the bracelet. Tap on the name and the Actifit
Go will pair with the phone.
e) Once the bracelet and the phone is paired the Bluetooth
icon will appear on the Actifit’s screen
To unpair:
a) Remove the Bluetooth from the App under the settings
menu.
b) Exit the App on the phone.
c) Turn off the Bluetooth on the phone.
4. Functions
a) Date and Time:
After the device has been successfully connected via
Bluetooth the phone’s date and time will automatically
synchronize with the bracelet.
b) Blood pressure monitor:
Press the touch button on the bracelet until the blood
pressure icon appears. It will automatically start with the
measurement and the icon will flicker. Please stay very still
when the blood pressure is being measured. If you would like
the save the measurement, please use the function in the app.
If the function is started from the bracelet the data will not be
saved.
c) Heart Rate Monitor:
Press the touch button on the bracelet until the heart rate
icon appears. It will automatically start with the measurement
and the icon will flicker. It is best to wear the bracelet on the
ActiFit Go V3
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions
1. Charging
Before using the ActiFit Go v3 please full charge it by using
the charging cradle provided. Ensure the ActiFit seats
properly in the charging cradle. Charging time is expected to
take 2 hrs.
2. Basic layout
