![background image](http://html1.mh-extra.com/html/merging-technologies/pyramix-6-2-sp2/pyramix-6-2-sp2_release-notes_1773831001.webp)
Merging Technologies
Le Verney 1070 Puidoux Switzerland
www.merging.com/Pyramix
T : +41 21 946 04 44
•
F : +41 21 946 04 45
Pyramix 6.2 SP2 Release Notes
Installation
Please consult the Installation Guide located on the Pyramix Installation Media (CD/DVD-ROM or USB
Memory card) for details of the hardware and software installation procedure and Authorization Key
registration process.
To install the Mykerinos board, TURN YOUR COMPUTER OFF (shut down then switch the power off).
Next plug the Mykerinos board into one of the PCI/PCI-Express bus slots on your computer and turn the
power back on.
Additional installation step for multi-board application
In order to enable multi-board operation, all Mykerinos cards in your PC have to be connected together
using a special HDTDM ribbon cable. This cable has to be plugged into the multi-pin connectors located
on the top edge of the I/O daughter cards. Please contact your Merging Technologies Sales Partner for
information on how to order this HDTDM ribbon cable.
•
To install the Pyramix Virtual Studio software insert the Pyramix Virtual Studio Installation Media -
the installation program should auto-start.
•
To install MassCore launch the MT Security Settings, go to the MassCore page and install the
MassCore RunTime (a MassCore base key is required).
Updates
Please check our Web site
http://www.merging.com
periodically for information, patches and updates.